Before talking about how to make drywall ceilings, you need to talk about what this material is. Let's figure it out. Gypsum board is the most demanded material intended for interior decoration of any premises in which there is a low level of humidity. It can be used to organize partitions, slopes, as well as to level ceilings and walls. If you make a false ceiling out of plasterboard, this will be a quick and convenient way to get a flat surface. Before proceeding with the installation of such a system, it is necessary to clean the surface of old coatings, and the joints of the plates should not be puttied, as the new ceiling will hide all these shortcomings.
How to make drywall ceilings
Before you start fastening sheets of material, you should build a frame for the future structure. First, you need to mark the perimeter on the wall, for which a hydraulic level is useful. Along the resulting line, you should fix the UD profile. With a small area of \u200b\u200bthe room, it is enough to insert several LED profiles into it, which will be cut to size. With the help of self-tapping screws on them, you canfix sheets of material. Such a technique is inappropriate in a room where the ceiling area is large enough, because it can sag due to a heavy load. If we talk about how to make a drywall ceiling in this case, it is appropriate to note that the profile must be fixed to the ceiling through special suspensions after a certain distance. Level control can be done with a stretched fishing line.
Other species
You can make a two-level plasterboard ceiling. For this, it is necessary to think over the outlines of the future design in advance. You should make patterns from cardboard of the required shape, so that later you can correctly make and fix the parts. Such ceilings look quite impressive, allowing you to create a unique interior. Such multi-level structures can be used in conjunction with stretch ceilings. If you are wondering how to make drywall ceilings in this case, it must be said that along the line marked on the first tier, it is necessary to fix the radius profiles, which are made from ordinary ones using metal scissors. To do this, you need to make cuts every couple of centimeters, and then bend the profile. It then needs to be fixed to the first level in those places where there are stiffeners, and after that the stiffening ribs are mounted in the same way as the first level. Patterns can also be used to pattern drywall elements, which then need to be fixed to the profile. Fastening is carried out using special self-tapping screws with conical heads.forms that will allow them to hide in drywall.
If we talk about how to make plasterboard ceilings, it should be noted that after constructing all the elements, it will be necessary to putty the surfaces in order to prepare everything for the final painting. Polyurethane skirting boards should be glued around the perimeter of the room.
