Sooner or later, any bath (even expensive and exclusive) loses its appeal. The fact is that over the course of many years of active use, the surface layer (that is, enamel) becomes thinner. As a result, ugly smudges, unaesthetic yellow or even red spots appear, as well as chips and roughness. Taking hygiene procedures in such a bathroom is at least unpleasant, so many people come to the conclusion that the old bath needs to be replaced. However, buying new plumbing is an expensive pleasure, and besides, dismantling an old bath in 99% leads to damage to finishing materials. Bathroom renovation is ideal.
How to paint a bathtub made of cast iron, tin or metal? The easiest way is to use spray enamel. A bathtub painted with high-quality enamel will look chic and aesthetic again!
How to paint a bathtub at home?
Is it possible to update plumbing that has lost its attractiveness? It should be said right away that painting a bathroom will require accuracy and careful processing, but if you follow the instructions, everyone can paint their own bathyourself.
Want to know how to paint a bathtub at home and get great results? In this case, you should purchase all the necessary materials and carefully study the phased work plan.
To work you will need the following materials:
- enamel;
- primer;
- special degreaser (traditional acetone can be used);
- lint-free wipes (preferably natural fabric);
- protective polyethylene film;
- construction tape;
- sandpaper;
- thick rubber gloves, mask;
- detergent and clean sponges.
Preparing the bath
Painting a bath with enamel is quite simple. To do this, prepare the surface for painting.
- All surfaces to be painted should be thoroughly washed with detergent.
- Tub needs to be dried.
- Using sandpaper, you need to remove the top layer of old enamel. Particular attention is paid to damaged areas.
Preparing the bathroom
- Dust that remains after working with sandpaper is removed with clean, lint-free wipes. Be sure to dry!
- The drain and overflow piping must be disconnected from the bathtub.
- Fauces, showers, etc. carefully closed with a dense film of polyethylene.
- With the help of film and adhesive tape, it is necessary to close all surfaces, withwhich the bath is in contact.
Surface priming:
- surface primer must be done with a brush;
- after drying, the primer should also be treated with sandpaper;
- dust is removed with lint-free dry wipes.
Applying spray paint
- The paint is applied in three layers. This is done with smooth movements at a distance of about 25-35 centimeters.
- In places where there were stains, chips and drips, the paint should be applied in a thicker layer, carefully painting over all ugly places.
- After applying each layer of paint, you need to wait about 30 minutes (for the top layer of enamel to dry).
- After treatment, the bath can be used only after 2-3 days (until the paint is completely dry). Drying time depends on weather conditions and air temperature. Accordingly, the hotter, the faster the paint will dry.
Following these simple rules, everyone will be able to paint the bath with enamel and save on the purchase of new plumbing.
Why overpay when buying a bath and do cosmetic repairs after dismantling and installing new plumbing, if you can update the bath with minimal effort?
How to paint a cast iron bath at home?
Cast iron bathtubs are painted just fine. Using the above tools and following the step-by-step instructions, you can paint a cast iron, metal or tin bath at home. It is desirable that the room in which the staining will be carried out is wellventilated. When working with an aerosol, it is mandatory to wear a mask and gloves. Aerosol enamel is a chemical that should not be inhaled. Protection will avoid unpleasant he alth consequences.
Cast-iron bathtubs have a large number of advantages, they perfectly retain heat, so that the water does not cool down for a very long time. Therefore, if your cast iron bath has lost its attractive appearance, do not rush to change it to a model made from more modern materials. Enameling will help save the day.
Paint selection
How to paint a bath at home? The choice of materials is very important! The result of the work directly depends on the accuracy of the application and, of course, on the quality of the paint used.
It's worth saying right away that you don't need to save too much and buy cheap paint that is neither reliable nor of high quality. Otherwise, it will incur additional costs.
So what's the best color to paint a bathtub with? Experienced professionals who have extensive practical experience recommend using epoxy-based enamel paint. This paint is produced in the form of an aerosol and has excellent characteristics. The manufacturer should also choose a well-known and reliable. Large companies value their reputation, so their products comply with all existing global requirements and standards.
Is it profitable to paint the bath yourself?
Perhaps you are also interested in the question: “How to paint a bath at homeconditions? , but you doubt that this venture is worthwhile.
Painting a bath is several times cheaper than replacing it. This is not just savings, it is an opportunity to increase the life of any bathtub by at least one and a half times! The work on updating damaged plumbing will not take much time, and the result will exceed all expectations.
Bathtub spray painted looks like new! At the same time, the cost of enamel in an aerosol and other materials is relatively small. Especially when compared with the cost of a new modern bath. The benefits are clear.
Helpful tips to help you maintain an excellent coloring result for a long time:
- do not soak laundry in the bath;
- don't leave water in the bath for a long time;
- do not use chemical cleaners that can damage the enamel.
Any bath is subject to restoration! The main thing is to show patience, accuracy and use quality materials.
