Many enthusiastically look at furniture stores for expensive kitchen sets.
Often people only dream about them. Of course, you can save up the necessary sum or buy furniture on credit. But there is another way - to make a kitchen set with your own hands. Yes, it will take some time and fuss, but in the end you will get a low price and unique design of kitchen furniture.
The first step is to create a project. Competent and correct arrangement of furniture in the room will allow you to get the maximum convenience and functionality of the kitchen. When creating a project, it is necessary to take into account the future location of the hood, stove, refrigerator, microwave (oven), sink, etc. You should pay attention to the corner kitchen set, which makes it possible to use the space of the room expediently. You can create a kitchen project yourself, for example, find on the Internet the option you like with ready-made drawings. You can also contacta designer salon, where they will competently create a project according to the size of your room, select a style and color scheme.
The next step is to create a drawing of a kitchen set. Despite the wide variety of styles, the headset has a common structure, which consists of simple components. These are the buildings and facades that give it its appearance. Creating a kitchen set with your own hands, first of all, it is necessary to calculate the number and dimensions of the cases. If you have a small kitchen space, then it would be more appropriate to place furniture along the wall. When creating a drawing, it is necessary to be guided by standard dimensions, such as the height of the case (lower) - 850 mm, the height of the plinth - 100 mm. The height of the upper cases can be different, but according to the standard it is 720 and 960 mm. The worktop has a standard width of 600mm and the depth of the wall cabinets is 300mm.
Please note that the depth of the lower cabinets should be less than the width of the countertop. This is done in order to be able to create a visor in front of the body (50 mm), and space for pipelines (100 mm) is needed at the back. Facades are measured in 100 mm increments starting at 300 mm. The width of the body and the upper and lower can reach up to 800 mm. The main thing is to remember that when creating a corner kitchen set, all calculations are carried out from the corner.
After the drawing is ready, it is necessary to write out all the dimensions of the structural parts, and after a thorough check, you can order them in production. Tillparts will be manufactured, accessories should be purchased at a furniture store, often they are also sold at the production for sawing material.
After receiving all the details, it remains to assemble the kitchen set with your own hands. As a rule, the assembly starts from the bottom module. If you have a corner kitchen project, then you need to start with a corner cabinet. After assembling all the modules and placing them on the same level, they are fastened together with self-tapping screws, and only then you can install the countertop, which is also fastened with self-tapping screws. Installation of upper cabinets is carried out using special wall mounts. And the last moment is the installation of fittings and the arrangement of household appliances.
You can say that the kitchen set is made by hand!
