Cut-off saws can cut through wood fairly quickly. They can also work successfully with aluminum profiles. The peculiarity of this power tool lies in an interesting design that allows you to change the position of the disc. As a result, the cutting angle can be adjusted. At the same time, the parameters of the inclination of the disk for models can vary greatly. The power of this tool is controlled by a regulator. To remove dust during operation, the device has a bag.
Additionally, various functions should be noted, and one of them is soft start. As a result, the comfort of work can significantly increase. Today, manufacturers can offer many options for saws. According to their characteristics, they should be divided into budget, medium and professional models. The choice of the buyer will depend on the characteristics of the power tool, as well as its price.
What options does the saw have?
Among the important parameters you cannote the power consumption of the device. This indicator is measured in kW. The voltage for many models is standard and is 220 V. However, the operating frequency can vary greatly. The power parameter of the miter saw affects the number of revolutions that the blade makes. The manufacturer also indicates its dimensions, on which the diameter of the saw blade depends. Bevel angles are measured in degrees. Additionally, the manufacturer indicates the dimensions, as well as the weight of the tool. This indicator affects the comfortable use of the saw.
Saws from Bosch
Bosch has always stood out on the market for its quality. Most models are comfortable and practical. At the same time, the handles are rubberized and hold well in the hand. The Bosch wood miter saws have a dust extraction system. This process takes place with the help of a special pipe, where air is sucked into the bag. Thanks to the built-in supports, the stability of the tool is on top. In turn, the legs at the base are rubberized. It is possible to control the accuracy of work on a special scale. To adjust the angle of inclination on the side of the power tool there is a convenient regulator. A soft start system is provided by the manufacturer in all models. As a result, the shortcomings of Bosch saws are quite difficult to find.
Comparison of models: "Zubr"
Miter saws for wood "Zubr" can boast of compact size. Average power tool weightfluctuates around 14 kg. In a minute, the disk is capable of making more than 4000 revolutions. In this case, the frequency is maintained stable. The average power of miter saws fluctuates around 2 kW, and the maximum voltage is 230 V. The diameter of the saw blade of the device depends on the modification. For the most part, the manufacturer indicates the dimensions of 254 by 30 mm. The maximum angle of inclination of the disc is 47 degrees. A professional saw model will cost the buyer 30 thousand rubles.
Metabo saws
Metabo wood miter saws are significantly inferior to Bosch models in terms of performance. This is especially true for structural strength. Thus, stability during operation of the power tool is not enough. There are also some adjustment issues. The maximum angle of inclination at the disc is only 45 degrees. The locking system, in turn, looks unreliable.
Of the advantages, powerful motors that are installed with a safety switch can be noted. As a result, the saw blade stops pretty quickly. Models of the specified brand can be connected to a vacuum cleaner. At idle, the disc is capable of approximately 3800 revolutions per minute. The voltage of the device is standard and is 220 V. The frequency for many models is at around 45 Hz. The depth of cut at a low angle is a maximum of 90 mm. The model of the above company will cost an average of 15 thousand rubles.
How good are Corvette devices?
Manymiter saws for wood "Corvette" can boast of simple operation. The power of the power tool can be changed using the knob on the side panel. To turn off the device there is a special trigger. The launch of the saw blade is quite smooth. This ensures good work comfort.
Weak stability can be noted among the shortcomings. The operating frequency of a miter saw is 45 Hz on average. The devices can operate from a 220 V network. Most of the models of the above company are suitable for domestic use, and there are few professional models on the market.
New Interskol models
Due to the high power miter saws "Interskol" for wood are able to gain good momentum. The average frequency of devices fluctuates around 50 Hz. The mains voltage of many models is 220 V. The electric motors in the saws are collector. Additional features include reliable protection systems. The maximum angle of inclination for saw blades is 50 degrees. They are regulated quite smoothly, which is good.
Excellent stability of the device is ensured by rubber struts. The lower frames are made of steel and are able to withstand significant loads. This company produces professional models with great success, and a table miter saw for wood costs an average of 16 thousand rubles on the market.
Saws "Stark" and their characteristics
Saws "Stark" have large discs in their kit. Due to this, their turnover rategood. In general, the handles of the models are comfortable. At the same time, the structures are quite stable during operation. In the kit, the manufacturer attaches a key to the device, as well as a brush for cleaning the miter saw. Adjustment of position of a disk is available bilateral. The protection system in all models is installed class "IP26". The actual braking of the disc is quite fast. The maximum tilt angle is 45 degrees. These tools are capable of working with workpieces of any length.
Review of "Dew alt" models
According to the characteristics of the Dew alt saws, they are most similar to the Bosch models. The electric motors on them are also good, and the power is about 1.6 kW. The limiting frequency is at the level of 50 Hz. In general, the disc spins quite smoothly, and as a result, the cut can be made very accurately. The stops in many models are double-sided. In turn, the clamps are installed with a latch, and you can always secure the workpiece.
The bag for collecting chips in saws is mounted from the side. Thus, it does not interfere with the operation of the device. The saw comes with a metal case. Due to the low weight of the tool, it is quite easy to transport it. Directly there are hard-alloy disks. Additionally, it should be noted that they are produced with soldering. As a result, the Dew alt pendulum miter saw for wood can last a long time, and the average model costs about 16 thousand rubles.
Saws offmanufacturer "Hyundai"
The wood miter saws from this company are best suited for demanding tasks. A feature of many models is convenient regulation. The angles of the disc can be set to different. Many models have a dust extraction system. With a powerful electric motor, the frequency of revolutions per minute is more than 4200.
Electricity consumption of saws is acceptable, and weak frames can be noted among the shortcomings. Thus, the stability of the instrument is not very good due to the small feet. The average saw blade diameter is 254 mm. As a result, we can say that the saws of this company are inferior to the leaders in this area, but they are not in last place. An unprofessional model will cost an average buyer 20 thousand rubles.
What is Makita ready to offer?
The wood miter saws of this company are most suitable for professionals. Their limiting frequency is on average about 55 Hz. The rated power of the electric motor fluctuates around 2 kW. The protection system is installed class "IP 26". Thus, short circuits are quite rare. Another advantage of saws of this brand can be called high-quality handles along with frames. They are fully rubberized and have good stability.
As a result, working with a power tool is quite comfortable. The saw blade is gaining momentum very smoothly. Compared to Bosch models, the tilt angles are better andup to 70 degrees. In terms of dimensions, the models of this company are at an average level, and the saw usually weighs about 10 kg. Of the shortcomings, only high prices can be noted. A professional model will cost the buyer on the market 30 thousand rubles.
Characteristics of models "Vitals"
The miter saws for wood of this company are similar in parameters to the Metabo models. Electric motors in the devices are of a collector type. Protection systems are installed by manufacturers of quite high quality, but problems with short circuits happen. The saw blade can make up to 3800 revolutions per minute.
The limiting frequency of the power tool is at around 45 Hz. The mains voltage indicator is on average 230 V. Saw blades are available only with dimensions of 305 by 32 mm, and the maximum bevel angle is 50 degrees. In this case, the slopes can be adjusted during operation. The transmission of rotation in all models is of a belt type. Of the shortcomings, the large dimensions of the devices should be noted. The average weight of the assembled power tool is 23 kg.
Saws brand "Feida"
In terms of the power of electric motors, the combined miter saws for wood of this company lose to many. On average, the frequency is maintained at around 50 Hz. In a maximum of a minute, the saw blade is capable of making up to 4000 revolutions. The dimensions of the device of this company are not distinguished. Overall, their design is quite nice. Handles includedrubberized and in the hand during operation they hold perfectly.
Horizontal clips are included with the device. Additionally, the manufacturer applies stops that help in installing the workpiece. Of the shortcomings, the complex maintenance of devices should be noted. At the same time, their dust collectors do not work properly. You can also mention the weak cooling system of the electric motor. As a result, the saw cannot be operated for long periods of time without interruption. As with saws "Vitals", the transmission of rotation of the disk is of a belt type. The model costs on average about 14 thousand rubles.
Summing up
According to the characteristics, miter saws for wood from the Bosch company, as well as Makita, look the most preferable. If you choose among middle-class models, you can select devices from Stark, as well as Hyundai. In general, they are universal and the prices are reasonable. Interskol saws can be called the most convenient, and they are perfect for beginners. They are also easy to maintain and have a reputation for good performance.
