Many people use the cooler at home. Such an acquisition is very convenient, you can always pour yourself clean water. No need to wait until it passes through the installed filter. It is important to remember that you need to regularly sanitize the cooler. This procedure helps keep the container clean and prevents the growth of bacteria. How to perform this operation correctly? Consider in our today's article.
Pre-training
Unplug the power cable before cleaning and sanitizing the cooler. There are also a number of prohibitions:
- Do not submerge the cooler in water. If it is very dirty, then you need to use special cleaning products.
- Steam cleaning systems are not allowed. Do not work with machines that use high water pressure for cleaning.
- To sanitize the cooler is notit is recommended to use abrasive powders for cleaning. Avoid products containing gasoline and acetone. Kerosene is also banned from use in this case.
How often do you need to cleanse?
The cooler should be cleaned and sanitized once a month. Some people prefer to do cleansing procedures every six months. This period of time is too long for various microorganisms to appear on the cooler, causing indigestion in humans.
Who can sanitize?
For the sanitization of the cooler, it is best to call specialists. Many companies provide cleaning services these days.
If it is not possible to call professionals in this case, then you can carry out the procedures yourself. To do this, you must read the instructions for sanitizing the cooler. It details cleaning methods.
Recommendations for work
Cooler can be sanitized at home. To properly carry out this procedure, you must adhere to the following recommendations:
- When it's time to change the bottle, you should always rinse the bottle holder, as well as the needle. Bacteria, as a rule, multiply in this hard-to-reach place. Dust may get inside. In some cases, dirt accumulates in the bottle receiver, which is difficult to clean out. Bacteria begin to multiply at a tremendous rate. Attimely washing of cooler parts does not cause this problem.
- It's worth stocking up on a clean sponge. Each time you change the bottle to a new one, you need to wipe the surface around the neck. Alcohol wipes are acceptable.
- You should remove the sticker and plastic packaging from the bottle. All the dirt that accumulates during shipping remains on the film.
- It is necessary to estimate the degree of contamination of the cooler. You may need to use chemical cleaners in the work.
- To complete the procedure, you need to take a washcloth. Do not use materials that contain abrasive particles. They can scratch the cooler, and dust and dirt will begin to settle in these places. It is necessary to clean the container to such an extent that there is no mud and mucus left in it.
- It will take time to repeat the procedure.
External cleaning step by step
If sanitizing the cooler at home with your own hands, the operation must be carried out strictly according to the rules:
- You need to disconnect the device from the network.
- It's worth going over the case with a damp cloth.
- It is necessary to remove all parts that are not tightly fixed. All parts must be washed in a special foam. It is important to wash all parts by hand.
- After external cleaning, you can proceed to the internal.
External cleaning of the cooler is best done on an empty system. You can wash the outside of the machine with dishwashing balm. Available for salespecial substances that are needed to clean the cooler. It is important to process all external parts of the device. Need to check if the faucet is leaking.
What do I need to purchase for cleaning?
To process the cooler, you need to buy special miniature brushes. They are great at dealing with pollution. You will also need a special cleaning agent and sponges. A washcloth is well suited for this job.
Step by step instructions for cleaning the inside of the machine
To properly clean the floor water cooler, you need:
- Get an empty bottle out of the device. It is usually fixed in the drip tray of the device.
- You will need a bucket in order to drain the water that was in the tap.
- Check how cold the hot water is. If it is really cold, then you can drain the hot water using a special tap.
- Drain any remaining liquid from the machine. To do this, open the plug from a special valve. It is responsible for draining and is located on the back of the device.
Which solution to use when cleaning?
Many are wondering which water cooler cleaner is best to use. The choice of funds is huge.
Cleaning a floor water cooler is not difficult even for a beginner in this business. You can buy a ready-made solution. It is possible to prepare the desired remedy at home.
How to make cooler cleaner at home?
To cookquality cooler cleaner at home, you will need:
- Citric acid, it needs no more than 100 grams. This product can be purchased at any grocery store.
- Five liters of water, it will need to dissolve the acid.
How to properly pour water into the cooler?
To correctly fill the bottle receiver with water, you need:
- Remove the device from the device.
- Turn the bottle receptacle counterclockwise, only after that it is permissible to pour water into the cooler.
How do you know when the tanks are full?
To find out that the tanks are filled with a solution, you can click on the hot water tap. When the tanks are completely filled, the liquid begins to flow continuously. Similarly, you can check the cold water faucet.
When the tanks are full, you need to connect the cable to the network. The switch responsible for the flow of hot water must be set to the "on" position. The switch is moved to position 0 when the water is well warmed up in the system. After that, you can pull out the cord of the device from the network. The solution from the tank can be drained after six hours. It is important not to forget to drain the water from the taps. There is a valve for draining water, through which the remains of the finished solution come out.
How much water do you need to flush the cooler?
About four liters of fluid should circulate constantly in the system, it should be washed off after six hours. Do not forget to open the drain valve. In this case, the water itself will leave the tank.
What are the nuances in this process?
There are a number of models of coolers in which a compressor cooling system is installed. Some have a built-in fan. You need to clean its blades with a damp cloth.
One of the main mistakes in cooler sanitization is the lack of sanitation in the area where the bottle touches the bottle receiver. This area should be treated with particular care, because it accumulates the most germs.
Conclusion
So we've seen how the cooler is sanitized. As you can see, the procedure can be done by hand. But you need to clearly follow the instructions and know the above nuances, then the result of sanitary cleaning will definitely not disappoint.
