Cutting saws are suitable for sawing wood at any angle. The clear advantages of the modifications are high performance, stability and convenient sawing control. However, in this case, much depends on the manufacturer of the saw. In order to understand the issue in detail, it is worth first of all to consider the device of the standard model.
Saw pattern
The homemade wood trimming scheme includes a gearbox, a rotor, a motor, a carriage and a saw blade itself. Many devices are made with a primer. Blockers for them are suitable planetary type. It is also worth noting that the gearbox includes an adapter and another regulator. A starter is used to start the modification. Modern devices are sold with various types of barriers.
DIY device
Ordinary do-it-yourself wood trimming is quite simple. First of all, it is worth choosing a motor for modification. It is more expedient to take a single-phase model of low power. Additionally, a starter is required for it.contact type. It will have to be installed through the terminal box. The frame for the equipment is made of steel plates, which are rigidly fixed on the sides.
In order to set the depth stop, a small plate is soldered. The saw blade must be fixed on the stand. The motor is connected through the rotor. The output contacts of the model should be carefully isolated. The primer for many models is at the top of the structure.
Features of double primer models
Saws with double primer are suitable for fast sawing of wide boards. Many models are produced on single-phase motors, and their frequency is 1500 rpm. It is also worth noting that the devices are distinguished by high performance. They don't need maintenance. Standard trimming on wood is made with a planetary blocker. Her rotor is attached to the adapter. The casings of the models are used in low density. In some cases, saw blades are fixed on racks. It is more expedient to use starters of the contactor type. To increase the security of the modification, dampers are installed.
Reviews about Makita devices
Makita saws are of high quality and efficient motors. Many devices in our time are actively used by professional builders. Their maximum cutting angle is 40 degrees, and the maximum power indicator can reach 3 kW. Devices differ in frequency, andalso dimensions. When choosing a modification, you should pay attention to the casing of the device. Conventional woodcutting is done with one throttle. Their adapters are used with metal clamps. Saw blades are changed using a key, which should be included with the product.
Opinions on saws based on two-phase motors
Trimming with wood broach on a two-phase motor can work for a very long time. The level of overheating depends on the type of ventilation ducts. Modern modifications stand out for their portability. It is also worth noting that there are many devices with multiple ventilation ducts. Models with two handles are in great demand. The rotors of the models are used both with regulators and without it.
A good homemade wood saw has a frequency of 1700 rpm. Not all modifications are suitable for sawing boards. You also need to remember that throttle models are very expensive in stores. Most devices are made on manual starters. However, there are models with electronic counterparts that are made specifically for professional builders.
Features of models with worm rotors
Saws with worm rotors can work with oak and even pine. They have good performance with low energy consumption. Many builders prefer them because of their compact size and durable racks. Carriages are quite often used with pads and are fixed under the motor. A standard wood trimmer has a power of 2 kW, but is not capable ofboast high frequency. Flanged versions are suitable for short-term operation. They have a very low efficiency.
Reviews about Fort devices
Saw brand "Fort" reviews, as a rule, are positive. Models of this company are chosen for high performance and high-quality adapters with locks. Guides are often made on stops. Due to this, a high degree of stabilization at high speeds is achieved. It is also worth noting that there are modifications with distributors that are capable of operating at a reduced frequency.
Many devices are made with spindle assemblies. However, modern models do not have them. Regulators are used to switch modes. Rotors are quite often installed with an open stem. Support carriages are available with and without clamps. Quite often, wood trimming (pendulum) is used for cutting at a large angle.
Opinion on saws based on a 4 kW motor
Saws based on 4 kW motors are suitable not only for sawing boards, but also for processing fairly wide bars. Many modifications are made with a primer. It is also worth noting that on the shelves, manufacturers provide modifications with two handles. They vary greatly in size.
If we consider the standard model, then its frequency is 120 rpm. It is also worth noting that there are modifications with a channel cooling system. Throttledampers are used without an adapter. Rotors can be found mainly of the planetary type, which work through the control unit. Braking systems are used only chain type, and visors are used with protection.
Features of models with kerf limiter
Saws with kerf limiter are universal tools. Starters for modifications can be used mechanical and electronic type. In this case, primers are applied with dampers. Some experts note the convenience of these devices. Limiters are installed, as a rule, under the rotary boxes and do not take up much space.
Spindle assemblies are available with and without retainers. It is also worth noting that the market is full of modifications on contact distributors. They are distinguished by increased frequency, and the motors are mainly used of a single-phase type of low power. Shrouds are installed only on the rotors. Therefore, they have a high noise level. However, there are also professional tools. For normal operation of the limiters, open and closed type rods are used. Torque is generated by a spring.
Reviews about Interskol devices
Saws of this brand are produced with worm spindles. Many models have several distributors at once. Another distinctive feature of the modifications is considered to be a high-quality cooling system. Quite often, motors are used for 2 kW with a frequency1300 rpm. Spindle units are fixed under the rotors and do not take up much space. The rods are installed only in a closed type, and they do not need maintenance. Models are great for working with oak boards. Experts advise them for professionals. Also in the assortment there are a lot of goods at affordable prices.
Opinion on saws based on driving primers
Drive primers are in high demand right now. Trimming on a tree of this type stands out for its performance. At the same time, high power motors are installed under the tools. Some experts advise choosing modifications only with a limiter. In this case, the rotor boxes must be of a closed type. Do not consider modifications with junction boxes.
There should be cooling holes at the back of the modification. The motor must be in a tight casing. Anchor modifications with a frequency of 140 rpm are especially popular. Stoppers are standard used with stems. It is also worth noting that there are modifications with one handle, which are lightweight and very compact. Such tools should be used for repairing and sawing small workpieces. There is a good trimming on wood (market price) about 25 thousand rubles.
