If you, like many owners of apartments and houses, have a question about how to paint ceilings with a roller, then you should familiarize yourself with the technology. It will help you understand how to avoid mistakes. First you need to assess the condition of the surface and prepare the base, which guarantees good hiding power and a quality result.
The choice of paint will depend on the condition of the ceiling. For example, for an unpainted surface or painted but in good condition, it is best to use acrylic paint, because it provides perfect whiteness, does not turn yellow over time, is economical and can be washed with household products.
Expert advice
But if there is dust on the surface of the ceiling or it is painted and has dirty spots, then it is better to choose a special ceiling paint that will help hide errors and is moisture resistant. The composition should be suitable for application over heavy stains,have high hiding power and dry quickly.
Selection of materials and tools
Before you decide for yourself the question of how to paint ceilings with a roller, you need to pick up tools and materials. As for the paint, it can be anything - latex or acrylic. However, for ceilings, experts recommend using water-based enamels. Working with them is a real pleasure, because they lay down easily and evenly, have almost no smell, are washed off with plain water if necessary and wash well.
The mixture can have a matte finish, which is very important when painting is difficult, because working with a ceiling cannot be called easy. In addition, bumps and flaws will not be so visible on a matte surface. The paint should be fresh, but if the mixture has been stored for some time, then it should be checked for uniformity. Otherwise, the poor quality of the paint may adversely affect the result.
After choosing the materials, you can begin to consider the tools. In addition to the roller, you will need:
- paint brush;
- handle;
- bath;
- masking tape.
When choosing a paint brush, you should prefer one whose width does not exceed 5 cm. But the masking tape can be replaced with tape. The bath is usually a tray or cuvette. When purchasing a roller, you must buy one with a maximum width of 50 cm. The minimum value is 30 cm.
More about roller selection
Before you paint the ceilings with a roller, you must choose the main tool, while the consumer should take into account some recommendations. Firstly, the working surface of the tool must be fleecy, because the pile will allow you to paint all the irregularities. Secondly, when buying, you need to pull the pile and check if it falls out. After all, if this happens during staining, the villi will stick to the surface and the work will be spoiled.
Before you paint the ceilings with a roller, you should check the joints, which should not be visible. If this is the case, then the layer will be uneven, and you will have to cover the surface in several layers or completely redo the work. Both the first and second cases entail additional costs. Another important nuance when choosing a roller is its density. You can check this feature by holding the tool in your hand. If it is deformed, then you should refuse to purchase this dyeing device, because you will not be able to grind the paint as evenly as possible.
Additional recommendations for choosing a roller
If you want to understand which roller is better to paint the ceiling, you should know that you should not always trust the advice of the seller. Many of them are advised to purchase a foam rubber or velor variety. The base materials perfectly absorb liquid, therefore, a lot of paint will go away. When applying the composition to the surface using such a roller, bubbles will form. In addition, paintwill drip profusely on the floor, so the nap roller is an excellent choice for professionals.
Many home masters are also wondering which tool is better to choose - a brush or a roller. Paint brushes are a fairly simple tool, but when painting a surface, they leave streaks, marks, lint and streaks. Using a brush is almost impossible to achieve a completely even finish. And the layer will not turn out smooth, as when using a roller. And with the help of the last tool, it is possible to capture a more impressive surface area, while the composition lies evenly and neatly, without stripes and marks.
Preparing for coloring
Before you paint the ceiling with a paint roller, you must prepare a room from which all furniture and interior items are removed. If something cannot be taken out of the room, then it is necessary to use covers and a film, and for reliability, the material is fixed with adhesive tape.
The entire surface of the floor is also covered with newspaper or the same polyethylene. Windows are curtained, window sills are covered to protect materials from drops and splashes of paint. Shoes and clothing that you plan to use at work should be comfortable. You should wear a headdress or tie a scarf on your head. Do not forget about safety: eyes must be protected with goggles, and hands with gloves.
The surface of the ceiling is being prepared, the base is being cleaned of whitewash or old coating; putty will be able to repair bumps and seams. If stood in front of youthe question of how to properly paint the ceiling with a roller, then you should consider that the surface must be treated with a primer a day before applying the mixture.
It is primed in order to create a moisture-proof layer, while the paint keeps firmly and for a long time. Before painting, the mixture is well mixed, and hard-to-reach areas can be painted with a paint brush. It is also used for processing places along the perimeter and along the walls, where it is problematic to get close with a roller.
Detailed description of staining
Quite often, novice craftsmen wonder how to paint the ceiling with a water-based paint roller. If you are also among them, then first you need to pour the composition into the bath and soak the roller with the mixture. Excess is wiped on the inclined surface of the tray. The tool should be well saturated.
For convenience, an elongated handle is put on the roller. It is better to start work in the early morning and not take breaks, it is even better to work without a smoke break so that the previous layers of paint do not have time to dry before applying the next ones. It is necessary to start work from the door, you should move parallel to the window opening. The movements should be directed in parallel, and when applying paint to the previous strip, it is necessary to go about 8 cm.
Staining Features
If you are faced with the question of how to paint the ceiling with water-based paint with a roller, thenyou must remember that when applying one layer, it will not be possible to obtain a uniform surface. Each subsequent layer should be perpendicular to the previous one.
After applying the first layer, it is left to dry, only after that you can proceed to further work. The painting is carried out with an overlap to hide the transition and prevent unpainted areas. The composition is rubbed until a smooth coating is created. The penultimate layer should be directed along the window. That is, the movements should be directed parallel to it.
Additional expert advice
Preparation of the ceiling may include not only the application of putty, but also the implementation of grinding. After that, you can proceed to staining. When choosing a roller, you must choose one that is made of sheep's wool, as it has a lot of advantages. Among others, it should be noted that with this tool it is difficult to leave unpainted areas. In addition, such a tool will be characterized by high wear resistance and excellent absorbent properties.
By choosing a lambswool roller, you eliminate the need to remove parts that have peeled off the instrument from the ceiling, as happens when using cheaper products. The roller should be rolled over the surface without strong pressure. You should go over the same place several times, which will help to evenly distribute the paint.
If you are also among those who are wondering how to paint the ceiling with water-based paint with a roller, thenshould know that if there are several windows and openings in the room, the second layer is applied along the longest wall. You can reduce the consumption of the mixture by using a grid in the bath. When you roll over it with a roller, excess paint will flow back into the container.
If the ceiling initially has a yellowish tint, then you must eliminate the yellowness after painting work. To do this, add some blue pigment to the mixture. It must be diluted in water, and then added in small portions to a container of paint. The resulting composition is well mixed, and the procedure is repeated until the paint allows you to get the desired result.
For reference
Now you know how to paint the ceiling with a roller without streaks. However, the choice of the described tool does not mean at all that the work can be completed successfully. It is important to prepare the surface well, because the quality of further work will depend on it. In addition, the material at the base of the surface also affects the outcome, among others, drywall and concrete should be highlighted.
Conclusion
GKL perfectly holds any type of paint, but before applying a new decorative layer, the joints of the sheets of material must be sealed. They should be invisible, for this they are coated with putty. Such actions should also be carried out with self-tapping screws, which allow you to attach sheets to the frame and are installed at the first stage of decoration.
