How to make a slime with PVA glue: preparation of materials, mixing order

Table of contents:

How to make a slime with PVA glue: preparation of materials, mixing order
How to make a slime with PVA glue: preparation of materials, mixing order

Video: How to make a slime with PVA glue: preparation of materials, mixing order

Video: How to make a slime with PVA glue: preparation of materials, mixing order
Video: PVA GLUE WITH SODA? WHAAAAT?😱 THIS IS THE BEST SLIME RECIPE YOU DEFINITELY SHOULD TRY #123Go #shorts 2024, November
Anonim

Slime, or slime, is a toy for both adults and children. Slime first appeared in 1976, it was invented by Mattel. Originally conceived for children, the slime also appealed to adults, because playing with this substance is a very fun activity. The slime does not stain your hands and will not leave any marks on the wallpaper or other objects. Lizun is sold in stores, and they are willing to buy it, but few people know that a toy can be made by hand from simple ingredients. Let's see how to make a slime with PVA glue.

how to make a slime out of shampoo and pva glue
how to make a slime out of shampoo and pva glue

Toy story

For the first time, this toy became interested in the early 90s, when the popular animated series "Ghostbusters" was released on the screens. One of the main characters - the green ghost Lizun - became the prototype of the Mattel toy.

The composition of the jelly-like substance included suchcomponents like guar gum, minerals, borax. All these ingredients, mixed in certain proportions, made the toy so slimy and sticky.

Lizun from shampoo and PVA glue

Today, not everyone has guar gum, but PVA glue is in every home, so let's talk about how to make slime from shampoo and PVA glue. The recipe is very simple. You will need some shampoo, glue, and gouache or any food coloring.

The prepared ingredients are mixed in a ratio of 3 to 1. You need to mix three parts of glue with one part of shampoo. To make our slime as saturated as possible, a little bit of bright color is added to it.

The resulting mixture is then poured into a plastic bag and mixed until it becomes a uniform mass.

You can use not only PVA stationery glue. The best slime is obtained from transparent adhesives. Glue "Titan" is especially popular. It already has everything you need to make the slime soft and elastic. Another secret - the more glue, the more elastic the slime will be.

how to make slime from pva glue and tetraborate
how to make slime from pva glue and tetraborate

Slizun from glue and soda

But how to make a slime with PVA glue and soda? You will need: 2 tablespoons of glue, 150 ml of water, 3 teaspoons of s alt, and a suitable container. To make the slime colorful, add food coloring.

For cooking you will need hot water - it is poured into a container. Then s alt is added there. S alt and water must be mixed very carefully. It is best to use small scales for slime.s alt - it will dissolve very quickly and well.

Then dye or gouache is added to the liquid. In this case, the liquid must be stirred. When the water has cooled down a bit, you can add glue to the mixture. It is not necessary to interfere - the mass is left for about 20 minutes. When the allotted time has passed, the mass is stirred with a spoon. The glue will begin to separate from the water and after a while it will take on the desired consistency and appearance. As soon as the mass gathers around the spoon, you can safely pick it up.

This recipe, which allows you to make a slime from PVA glue, makes it possible to get a tougher toy. To make the slime softer, you need to use a different recipe with tetraborate.

how to make slime with pva glue
how to make slime with pva glue

Bora Slime

For this recipe you will need a special substance - this is sodium tetraborate, or borax. The drug can be purchased at a pharmacy, and if it was not there, then it is always available in online stores selling products for soldering and welding.

The ingredients used are: borax in the amount of half a teaspoon, 30 g of PVA glue, 300 ml of warm water, dye. You also need to prepare two containers. Let's see how to make a slime using PVA glue and tetraborate.

Pour a glass of water into one container. Slowly pour sodium tetraborate into this water. The mixture must be stirred. Pour half a glass of water into another prepared container and add PVA. The dye must be added to the diluted glue. To make the color more intense, you need 5-7 drops of dye. You can experiment with colors - three dropsyellow, four drops of green, or any other color.

When the dye and glue are well mixed and a homogeneous mass is obtained, then this substance must be added to the first container with water. Pour should be a thin stream and do not forget to stir. After a while, the mass will thicken - the result will be a real slime.

how to make a slime out of pva glue
how to make a slime out of pva glue

Shaving Foam Slime

This slime will look more like a marshmallow. The toy will turn out elastic and soft, snow-white color. Of the ingredients you will need 1 bottle of shaving foam, 50 ml of ordinary water, dyes - preferably a few, glue, borax, wooden spatula. Let's see this recipe on how to make slime with PVA glue.

So, you need to pour tetraborate into the container - 1.5 teaspoons of the drug will be enough to make this slime. There is also water poured in. Then the components are mixed until a homogeneous mass. Foam should also be added there and mixed again until a homogeneous mass is obtained. Then add PVA and mix well again. A little more is added to the water - two or three teaspoons of sodium tetraborate. And the mixture is stirred again.

The result should be a homogeneous mass. If the slime is very sticky, you need to add more tetraborate to it and mix. In the process, dyes and glitter can be added to the slime.

Glue and toothpaste

There is also such a recipe. It is very simple - you only need two components. This is directly glue and toothpaste. The slime is prepared as follows.

Half tubetoothpaste is mixed with 1 tablespoon of PVA. It is necessary to mix until a homogeneous mass. Glue is added if the slime could not reach the desired consistency. When the slime has thickened enough, the container is placed in the refrigerator for about 15 minutes. Here's how to make a slime with PVA glue quickly and easily. The toy will have a characteristic smell of toothpaste for some time - the smell will go away, it's okay.

This is actually not a simple slime. It can be used in different ways - when it is cold, it can be used as an anti-stress toy. At room temperature, this is a normal slime.

how to make a slime out of pva m glue
how to make a slime out of pva m glue

How to store slime?

Now it's clear how to make a slime from PVA M glue. But not everyone knows how to store slime so that it does not dry out. It is better to store it in a jar or other container or in a plastic bag. The toy does not like the sun, but in general, the more often you play with it, the longer it will have a service life.

Unlike the factory made slime, the homemade slime does not like washing - if it is washed, the toy will lose its properties or even deteriorate.

Recommended: