The Polaris company has been operating on the Russian market for more than 19 years. This company is mainly engaged in the manufacture of water heaters. However, on the shelves in stores you can also find small household appliances of the specified trade brand. Polaris began manufacturing air conditioners and climatic devices not so long ago. The first models of water heaters were released in 2000. This company today is able to boast of a really large assortment. Water heaters "Polaris" are produced in Italy, China, and also Russia. However, the main factory is located in Israel.
What is special about the Polaris models?
Heating elements in all models are installed only tubular type. Due to this, the heating of the tank is carried out quite quickly. The rated power of water heaters depends on the dimensions of the model. The maximum temperature may also differ. If the tank is of a shut-off type, then the system can withstand significant pressure.
When it comes to closed modifications, there this indicator is usually at the level of 5 atm. The accelerated water heating mode is present in almost all models of the early and late series. The coating of the tank may vary, but most often manufacturers use stainless steel. When installing the device, problems rarely arise, the buyer can choose vertical and horizontal modifications for himself, based on his preferences.
Overview of the Polaris RMPS50 model
This water heater "Polaris" (50 liters) is capable of boasting a maximum power of 5 kW. It reaches the maximum temperature of 60 degrees in about 52 minutes. The heater in the tank is a standard tubular type. Problems with it occur quite rarely, the quality is excellent. Of the shortcomings, it should be noted a small indicator of limiting pressure.
If there is a large pressure in the water supply, the nozzles may be damaged. All this should be considered by the buyer when buying this model. Of the positive aspects, it is important to note the acceptable dimensions of the device. It is quite simple to install, fasteners are attached to the water heater.
Consumer opinion about the water heater "Polaris RZ10"
Many consumers choose this tap water heater because of its convenient operation. Customizabletemperature in it using a small regulator, which is located at the bottom of the device. Direct adjustment is carried out stepwise. In the first mode, which is called economical, the heater operates with a power of 3 kW. In turn, the maximum device is able to reach 5 kW.
The maximum temperature in this case will be exactly 70 degrees. The power indicator on the front panel is provided by the manufacturer. The water heater thermometer on the faucet has a built-in type with a scale of up to 80 degrees. There is a magnesium anode to protect the tank from overheating. In some cases, it may break, but such situations are very rare for owners. Problems with the safety valve are much more common. This happens due to power surges in the network.
What is interesting about the FDE50?
The tank system of these Polaris water heaters is of a closed type. This model is designed to warm up 50 liters of water. The rated power of the device is at the level of 6 kW. It reaches its maximum temperature quite quickly, and this is good news. Turbo mode will help the user to speed up the heating process. The system pressure is maintained in the water supply at the level of 8 atm. The inside of the tank is made entirely of stainless steel.
For convenient control, manufacturers have taken care of a simple mechanical regulator. You can monitor the power level using a system of indicators that are located on the control panel. The safety valve in this model is installed quite high quality. Heatingthere is only one element in the system. Branch pipes for installation are included in the kit with a standard diameter. There is a thermal insulation system in the water heater.
Owner reviews about "Polaris FDE80"
The indicated Polaris water heaters have good reviews, many owners preferred this model because of its high performance. There are two heating elements directly in the tank. Due to this, the heating time of water is significantly reduced. High-quality polyurethane is used for thermal insulation of the system.
Protection against overheating in the tank is set. The flange at the bottom of the structure is of a removable type. Given this, it can always be disconnected and cleaned. These water heaters "Polaris" (80 liters) can serve for quite a long time. This is largely due to the presence of a magnesium anode. The outlet pipes in the system, like the tank, are made entirely of stainless steel.
Overview water heater "Polaris FDRM50"
This water heater is designed for vertical installation. The rated power of the device is at the level of 7 kW. The thermometer is provided by the manufacturer as a built-in type. The system is powered by a 220 V network. There is an accelerated mode for quick heating of water in the tank.
The maximum heating temperature, according to the documentation, is 70 degrees. Of the features should be noted reliable system of protection. It makes the device safe for human he alth even with large power surges in the wiring. There is also protection fromleaks and overheating. The standard kit includes the following: water heater "Polaris", instructions and fasteners with connecting pipes.
"Polaris FDRM80": features and reviews
These water heaters "Polaris" have a maximum power of 4 kW, and the nominal voltage is 220 V. On the positive side, it should be noted the fast time of heating water. The supply system is installed quite high quality, there are no problems with the nozzles. Any person can adjust the power regulator. There is a thermostat to control the heating.
You can follow the operation of the device using the indication system. The pressure of the water heater in the pipe is able to keep high. The tank is coated on the inside with an additional layer to protect it from corrosion. The pipe connection in this model is provided lower. This water heater is installed on the wall, and for fastening all parts are included in the standard kit.
Parameters of the Polaris P100 model
These water heaters "Polaris" have a rated power of 4 kW, and the limiting frequency of the device is 45 Hz. The power source of the system is a network with a voltage of 220 V. The maximum deviation is 10 V. The modes in the water heater can be changed using the regulator, which is located at the bottom of the device.
Dustproof class is available for "IP24" series. All internal elements of the systemhigh humidity is not afraid. All wiring inside is protected. There are two heating elements in the tank. They are produced in a model entirely of copper with an anti-corrosion coating. A magnesium anode is also used to protect them. The tank itself is standardly made of stainless steel, and the temperature controller is mounted open.
Consumer reviews of the Polaris P80
Many customers choose this instantaneous water heater "Polaris" for its high power. For a large family, it fits well, but can also be used in the country. The anti-corrosion properties of the model are quite high. The temperature can be adjusted smoothly. Also, using the indication system, it is possible to monitor the operation of the device. To save electricity, the Polaris instantaneous water heater must be turned off for a while. Otherwise, the cost of electricity will be prohibitive, this should be taken into account.
If we consider the negative reviews, then some owners complain about the contamination of the nozzles. Experts believe that this problem is associated with network filters, which are located near the thermostat. When they become dirty, untreated water enters the tank on the heating tubular element. In this case, the anti-corrosion layer is not able to protect it for a long time. You can solve this problem simply by periodically cleaning the surge protector. To do this, remove the cover at the bottom of the water heater and remove the magnesium anode. Only then can you check the state of the line filter and then take action.any solution.
Features of water heater "Polaris PS50"
The specified storage water heater "Polaris" is in high demand on the market. Most people prefer it because of the simplicity of the design. You can install it in almost any apartment, it takes up little space. The control is the simplest, and it will not be possible to accurately adjust the power. However, the display system is installed, you can use it. There is only one heating element in this modification. Its maximum power is at around 4 kW.
Economy mode in the system is provided by the manufacturer. The voltage of the water heater is maintained at a maximum of 220 V. The deviation is only 10 V. Thus, the device cannot withstand a high load. In general, the supply system is installed quite high quality, pipes leak very rarely. The block of protection is available usual with thermal insulation. The thermostat is located at the bottom, as is the power controller.
Interesting model "Polaris FDRM30"
This electric water heater "Polaris" is able to boast of the AB 2.0 protection system. If the water supply is somehow interrupted, it will be impossible to turn on the heating element. This water heater has a self-diagnosis system. In addition to protection against overheating, there is a mechanism against freezing. The pressure the tank is able to withstand is simply colossal - at level 16atm.
The temperature sensor in the device is installed in the "TC2" series. It differs from other devices in high measurement accuracy. The mode of the accelerated heating is available. The maximum operating temperature of the device is at 75 degrees. The tank in this case is made of stainless steel. In turn, the pipes are provided with plastic ones. There is only one safety valve in the system and the maximum pressure is kept at 13 bar. The standard kit of the device includes everything you need to install the equipment.
