Before you build a wooden toilet with your own hands, you need to decide on its location and appearance. You can make a stand-alone structure, as well as a combination with a shower, when various amenities are placed under the same roof. A structure of this type should be located on a flat area or a very small hill, otherwise the cesspool will be filled with melt and rainwater. When making a toilet for a summer residence with your own hands, you need to take into account the distance to other buildings. For example, if 7-10 meters are enough from a dwelling, then it should be removed from the well by at least fifteen meters.
When arranging a wooden toilet with your own hands, combined with a shower, it is recommended to choose a place where at a certain time the sun changes the shadow. In summer, of course, it is better for him not to overheat, but he cannot be constantly protected by trees and other structures. Particular attention will have to be paid to the soil on which the structure will be located. It should not be very rigid and buoyant. Also, you can not install this buildingwhere there was previously a garbage or cesspool or cellar, as they greatly weaken the soil.
When making a wooden toilet with your own hands, you first have to draw up at least the simplest drawing and estimate, as well as carry out preparatory work. In fact, the process will require serious labor costs, but for a person who knows how to work with his hands, this is not scary. After choosing a place for the construction, it is very important to prepare well for work, buy the necessary materials and prepare the tool. Thanks to this, it will be possible to complete the building in a short time, without being distracted by other moments. Before construction begins, the project is fully checked, errors in which may adversely affect the reliability and aesthetics of the structure.
When a wooden toilet is made with your own hands, the frame is made of timber first. Vertical bearing racks along the length must be crossed at least three times by the crate. Then the structure will gain the necessary strength. A bar with a section of 40 x 80 mm or more is quite suitable. After the manufacture of the vertical structure, you can proceed to the crate for cladding. A good option is an edged board, which allows you to give the building a pretty look. It, in turn, is located horizontally or vertically, which is determined by the facing material.
Having finished the outside of the wooden toilet with your own hands, proceed directly to the arrangement of the inside. First of all, you need to organize a seat, whichinitially does not imply the presence of a toilet. It can be arranged in the form of a common platform or a separate elevation. In fact, this is a simple timber structure, upholstered with a board and having internal waterproofing. As for roofing, there are so many options here that you can completely get confused in their diversity. However, tightness plays the main role in our case.
