The heating system of a private house should be thought out as carefully as possible even at the construction stage, so many related problems can be avoided. This will be very beneficial when the installation of heating pipes and a boiler room begins. Technical niches should be provided for different needs, a separate room should be allocated for the boiler room, if there is any need for this.
Installation of heating pipes and the system in general can only be started if the roof and windows have already been installed. At the moment, it is customary to lay them using the hidden wiring method, that is, using strobes or directly in the floor. Laying pipes in a screed is the most appropriate, but if this is not possible, you can lay them directly in the walls. This method is used quite often on the second floors, where the floors are wooden. It turns out that the installation of heating pipes is best done while the screed is stillnot flooded, but the walls are already plastered. If you place the radiators before the plaster, then they will then need to be leveled. In some cases, all installation operations are carried out in two stages: first, pipe outlets are made with a margin, and then radiators are hung, which are connected after plastering. With this method, it will take much more time to work.
Should adhere to a certain technology. First you need to hang all the radiators, outline the boundaries of the strobe for the conclusions, and then gouge. When this is done, put the radiators in their places, wire the heating pipes, and then connect them. In places of withdrawal, they need to be fixed with cement mortar or alabaster. When everything hardens, it will be possible to remove the radiators. They should be folded away from the places of finishing work. If this is not done, then the film will not save them from damage and dirt.
You can make hidden wiring even when the house has already finished finishing. Installation of heating pipes can be made along the walls below, placing them in a special box. Such wiring is called plinth. Some Western manufacturers offer ready-made plinth heating wiring, which has ready-made materials and assemblies. However, you can also do it yourself. This is done using a plastic box similar to the one used for electrical wires.
Installation of the heating system: pipes
Iftee wiring is used, then it is better to lead pipes along the walls. However, it is worth leaving an indent of about 150 millimeters, which will help to avoid damage when you start nailing the baseboards. Modern systems do not imply the observance of some kind of slope towards the cranes, since this is no longer necessary. However, the installation of heating pipes should still be carried out taking into account certain rules. It is important to ensure that air congestion, that is, some kind of humps, cannot form in them. If this cannot be avoided, then a special valve should be installed at the top point to vent air.
You can use metal-plastic pipes for heating, the installation of which is not particularly difficult, or you can use other options available to you.
