Electric heater and boiler are equally in demand today. How to install such equipment will be described in this article. With the help of such a device, you can cope with the problems of turning off hot water. Among other things, such installations can work on an ongoing basis. In a wide range in modern stores, you can find storage or flow-through electric boilers, the latter of which are less in demand, because they are inferior to storage ones in terms of volume and profitability. To install such a device, you can use the services of specialists or cope with the work yourself, but you will need to follow all safety rules. To do this, the electricity is completely turned off, and the hot water pipes are blocked.
Preparation of materials
If you decide to purchase a boiler, how to install such equipment, you mustknow in advance. Of course, doing the work yourself is cheaper. If you refuse the services of professionals, then you should prepare a certain set of materials for installation. You will need plumbing linen or sealing tape, a safety valve, two flexible water hoses, and two nail dowels. When buying a water hose, you should take into account that you will need two elements, each of which is 2 m long. However, the length will depend on the distance to the tie-in to the water supply system. When buying dowel-nails, it should be noted that there must be hooks at their ends. By the way, about the safety valve. It should be mentioned that it comes with an electric boiler. The valve must have a diameter of 10 mm.
Preparation of tools
So you need a boiler. How to install such equipment, you should know even before you purchase it. Do you want to do the installation yourself? Good luck! However, it is worth considering that in some cases, if the work is carried out independently, the manufacturer's warranty will be canceled. In addition to materials, certain tools should be prepared, among them: screwdrivers, drills with a victorious tip for attaching to a brick wall, an adjustable wrench and a puncher. The latter can be replaced with an electric drill.
Installation instructions
Many home craftsmen, having learned how much it costs to install a boiler, prefer to do all the work on their own. This is not surprising, given that such servicescost about 5000 rubles. Do you have skills and do you know which side to approach the puncher and how to hold a screwdriver? Then why overpay? But if you do the installation yourself, you will have to prepare properly. Not the last role here is played by the reviews of those people who are not new to doing such a thing. If you study all the recommendations, you can come to the following.
The process should start by choosing a place to mount in the bathroom or bathroom. Most often, such equipment is installed above the toilet, where it will not interfere with anyone. It is necessary to check the strength of the wall, as it will have to endure the load from the boiler. If there are unreinforced plasterboard partitions in the room, then you should refrain from installing the unit on them. With a boiler volume of 50 liters or more, a double load will fall on the wall, that is, 100 kg.
Before you install the boiler in the apartment, you should decide on the lowest point of the location of the equipment, marking it on the wall surface. Next, the master measures the distance from the mounting plate to the bottom point. The first is firmly welded to the body of the equipment. The resulting distance must be marked on the wall. The next step is to drill two holes. The craftsmen emphasize that you need to remember that the mounting plate does not have such holes, anchors with a hook at the end should cling to its edge.
Recommendations for work
So, everything is ready to mount the boiler on the wall. How to install it correctly? The question is by no meansidle: the structure must be securely fastened, because the fall of such a massive device can cause injury. If the wall is made of concrete or brick, then for the work of the master it is recommended to use a puncher with a victorious drill. For a wooden wall, a conventional wood drill is used, the diameter of which is smaller than that of a plastic dowel. The latter must be installed in the hole and, if necessary, driven in.
The metal anchor is screwed in until it stops turning. As a rule, a depth of 12 cm is sufficient. The boiler should be hung by hooking the anchor hooks on the bar to fix it on the unit body. On this, the process of hanging the equipment can be considered completed. As you can see, the technology is not very complicated, so any home master can master it. At the next stage, you can connect the boiler to the water supply system, for this you should use flexible hoses.
Connecting
Judging by the reviews, polypropylene pipes can be used instead of flexible hoses, but it will cost more and take more time. There are two tubes at the bottom of the boiler, one of which has a blue plastic ring. Cold water will flow through it. The second tube is indicated in red and is intended for hot water outlet.
According to the craftsmen, in the place where cold water is supplied, a safety valve should be installed. It is usually supplied in the kit or purchased separately. The first step will besafety valve connection. Do not forget to pre-wrap plumbing linen or sealing tape on the thread.
Masters advise at the next stage to screw one end of the flexible hose onto the safety valve. In this case, it is necessary to refuse to use the tape, since there is a rubber gasket in the hose nut that acts as a sealant. Well, the question of how to install a boiler in an apartment is practically solved. The next step is to screw one end of the flexible hose to the pipe from which the hot coolant comes. No sealing tape is required either.
Now you can start connecting the free ends of the hoses. The end to which cold water will flow should be connected to the water pipe. A valve or tap must first be installed at this place, which will, if necessary, shut off the fluid supply. Do not neglect this recommendation, as the boiler may fail during operation or require replacement of spare parts. The free end of the other hose must be connected to the pipe that goes to the faucet.
Expert Tips
In principle, it is not difficult to install a water boiler yourself. You just need to arm yourself with certain knowledge (in addition to tools and materials). And there are many nuances in such a case. In particular, before connecting the unit, it is necessary to remove the tees on the water pipes. In the absence of certain experience, it is better to entrust this work to professionals. Now you cantake care of the electrical part. If we are talking about Thermex brand water heaters, then they have one feature, which is the presence of a cable for connection along with a plug in the kit. Moreover, this element is connected to the boiler. If this is not the case, then consumables will have to be purchased separately.
And more. To ensure everything goes smoothly (read - without accidents), the masters strongly recommend that you follow safety precautions when working with electricity.
What else needs to be considered when carrying out work
If you are faced with the question of how to properly install the boiler, then you should know that the cover does not have to be opened if everything is already connected in the equipment. It is enough to pre-install a grounded socket, which should be located near the equipment. Turn on the cold water tap to check how tight and secure the connection is. If there are no leaks, the boiler plug can be connected to the outlet. Now you know how to install a boiler with your own hands. If you did everything correctly, then the indicator on the case should light up. After that, you can set a certain temperature using the regulator, which is usually located at the bottom.
Conclusion
It is important to remember the main mistakes that are made when connecting the equipment described in the article. In particular, before installing a boiler in the bathroom, the masters recommend taking care ofthe presence of a hot water supply system with circulation. This will minimize energy losses if there is always hot water in the pipes.
