The quality of tap water leaves much to be desired in most regions of our country. Therefore, many owners install additional filters. They allow you to achieve high quality cleaning. One of the popular filters is Aquaphor OSMO-50 (use 5). Reviews of the presented system should be considered before purchase. Features of installation and operation will be discussed further.
General characteristics
The filter "Aquaphor OSMO-50" (Spanish 5) is a reverse osmosis system designed for deep purification of water from s alts, additional purification from colloidal, mechanical particles, as well as organic matter, viruses and bacteria. Extraneous odors and unpleasant aftertaste are removed from the liquid. The system can be used to purify water from a well, municipal water supply.
During the operation of the device, the liquid passes throughsemi-permeable membrane. In this case, pressure is applied from the water side.
The presented device comes in two versions. The first of them works under the pressure that exists in the water supply network. If it is low (does not exceed 2 atm.), You need to purchase a second modification. This is Aquaphor OSMO-50 (Spanish 5) PN. It comes with a pump that pressurizes the system.
Both varieties have high cleaning quality. These are ultra-fine filtration devices. This result is achieved due to the presence of a membrane and pre-filters. The system removes all harmful impurities from the liquid. Only water molecules can pass through the membrane. All chemical elements that are larger remain on the other side of this barrier. The result is crystal clear water.
Chlorine, oil products, nitrites and nitrates, organics and mechanical pollutants are removed from the liquid entering the system. In addition, the water softens, as hardness s alts are removed from it. Therefore, it can be used for cooking, scale will not appear on the walls. This is especially important for certain types of kitchen appliances, such as coffee makers.
Specifications
Several required components are included in the package. One of them is a storage tank. The fact is that the system cannot filter the liquid quickly. To meet the need of users for clean water, a tank is installed in the system. It has a volume of 12 litersmodels "Aquaphor OSMO-50 A" (isp. 5.) 10l - this is its useful volume. It is made of metal.
The system is designed to be installed under the sink. The filters have an open housing. The system is designed to filter liquids in cold water pipes. The liquid temperature should be 4-38°C. The working pressure in the water supply should be 2.8-6 atm.
In the water purifier "Aquaphor OSMO-50" (use 5) liquid passes through 5 stages. Purified water is supplied from the tap, which is supplied with the kit. It has a classic design.
An important indicator of any reverse osmosis filter is its performance. The presented model can clean up to 190 l / day. If this is not enough for your family, it is recommended to purchase another system. For example, it may be "Aquaphor OSMO Crystal 50" (Spanish 5). It is able to filter 375 liters of water per day. This is enough not only for a large family, but also for the staff of an average office.
The advantage is the use of universal flasks in the design. This makes it easy to find the right cartridges and replace them. This does not require a service call.
Features of operation
The package "Aquaphor OSMO-50" (sp. 5) includes several mandatory elements. To perform the installation correctly, you need to consider the main components and their features. So, the Filter has three pre-filters. Water passes through them beforegets to the membrane. This allows you to remove coarse impurities from the water and increase the life of the membrane.
The first pre-filter is a polypropylene module for coarse cleaning of mechanical impurities. Its service life is 3 months.
The second cartridge "Aquaphor OSMO-50" (use 5) is a deep cleaning module. It has been in operation for 6 months. It is followed by a polypropylene cartridge for mechanical aftertreatment. It needs to be changed every 3 months.
Then the water hits the membrane. This is the deep cleaning stage. The membrane should be replaced every 1.5-2 years. The fifth stage that water goes through is conditioning. For this, the system has a 2 in 1 module that corrects taste and smell. It is changed once a year.
Customer Reviews
Considering reviews of "Aquaphor OSMO-50" (sp. 5), it should be noted that buyers leave mostly positive feedback about the presented model. If you have experience of operating this reverse osmosis, share them in the comments to the article.
Customers note that the quality of the output water is high. Even in areas with a very contaminated liquid, it is possible to get rid of almost all impurities. This has a positive effect on people's he alth and the operation of household appliances.
The advantage of the model is the presence of a mineralizer and an additional post-cleaning carbon filter. The water has no foreign odors. The mineralizer restores the normal taste of the liquid. The fact is that after passing through the membrane? water loses almost all the minerals that our body needs. Users note that the mineralizer that comes with the kit eliminates this drawback. Water has a pleasant taste, as its composition is as close as possible to natural.
Among the negative reviews about "Aquaphor OSMO-50" (sp. 5), it is worth noting the slow filtration process. However, for a family of 2-3 people, the presented cleaner is ideal. If more than 4 people live in the house, it is worth buying a system with more performance.
Also, some customers don't like the faucet design that comes with the kit. If necessary, it can be replaced by purchasing a suitable model from the appropriate store.
In general, buyers agree that the presented filter is of high quality water purification. It is easy to operate. When installing or replacing cartridges, there are no difficulties. If they are replaced in a timely manner, the water quality will remain consistently high. The system will cope even with difficult pollution, for example, hydrogen sulfide, nitrates, viruses and bacteria. Therefore, water can be drunk, cooked with it, and given to children.
Expert reviews
Considering the reviews about "Aquaphor OSMO-50" (Spanish 5), which are left by experts, specialists in the field of cleaning technology, it can be noted that they call the model of high quality. This filter has more advantages than disadvantages. Therefore, it is in high demand.
Among the main advantages, experts call the versatility of the flasks and low cost. However, these are far from all the positive qualities of Aquaphor OSMO-50 (Spanish 5). The presented model has universal flasks in the kit, which greatly simplifies the system maintenance procedure. Also, a similar decision by the developers of the cleaner allowed to reduce operating costs.
Specialists note that the advantage of the model is high-quality cleaning of chlorine contamination of the liquid. For this, the system has two carbon cartridges. It also helps to eliminate all foreign odors.
The positive quality of the filter is the disinfection of the liquid with silver ions. Also, the unique technology used in the presented model is the Aqualen loading. It enhances the efficiency of carbon cartridges.
Another undoubted advantage is the small size. Installation is easy as finding a mounting location is easy.
Among the shortcomings, experts call the lack of transparent flasks. This does not control the contamination level of the mechanical cleaning cartridges.
System installation
Before starting operation, you need to study the instructions "Aquaphor OSMO-50" (use 5). If the steps are not performed correctly during the installation process, this may lead to a breakdown of the system. In this case, warranty service will not be provided.
Toinstall the filter with your own hands, you need to shut off the water in the system. The kitchen faucet must be opened to release the pressure. The connection point crashes into the water supply. The external thread must be wrapped with FUM tape.
Next, you need to connect the JG tube. From under the plastic sleeve, you need to pull out the latch. The end of the tube must be moistened with water, and then inserted into the fitting to a depth of 2 cm. It should rest against the wall. The latch needs to be reinstalled.
Next, you need to move on to installing a faucet from which you can collect clean water. In the sink, you need to make a hole with a diameter of 1.2 cm. A sealant is put on the tap thread, and then a washer and another gland. The tap is inserted into the prepared hole. On the reverse side of the sink, a plastic washer, a lock washer and a metal nut are put on the thread.
The instruction "Aquaphor OSMO-50" (sp. 5) says that all actions must be performed in a certain sequence. You need to put a nut on the plastic outlet. The conical sleeve must be inserted into the tube. The nut is screwed onto the faucet bushing.
A drainage collar is installed in front of the siphon. For it, you need to drill a hole with a diameter of 7 mm. On the inside of the clamp, you need to glue the gasket (the protective film is first removed from it). The holes in the fitting and the drain line must be aligned. Next, the bolts are tightened. They must be fixed evenly. In this case, both parts of the clamp will be parallel.
Membrane and cartridge replacement
Except for the "Aquaphor OSMO-50" installation (use 5)? requiredconsider the membrane replacement procedure. To do this, disconnect the JG tube from the fitting. Pull out the locking latch and press on the end of the plastic sleeve. This will allow you to pull out the handset.
The membrane body can be removed from the seat. You need to grab it and pull it up with effort. Next, the housing cover is unscrewed. The new membrane is removed from the package. It is installed in place of the old filtration element. The wide ring of the seal must be on the threaded part of the body. The membrane is pressed in with sufficient force so that it assumes the correct position inside.
You need to check the integrity of the seal, and then screw the cover onto the body. It is set to its original position.
Next, the end of the tube must, as during installation, be moistened with water and installed in the fitting until it stops. It should be noted that during the initial installation of the system, it is not necessary to install cartridges or a membrane. All filter elements are already in place.
Replacing "Aquaphor OSMO-50" cartridges (use 5) is even easier. The kit includes a special wrench that unscrews the flasks. First, the water is turned off, and the faucet at the sink is opened. If the pressure is not relieved, it will be difficult to unscrew the flask. Old cartridges are carefully removed from their seats. Filters must be thoroughly rinsed. You need to install new replacement cartridges. Further, the flasks are easily twisted, and the system can be operated again.
Flushing the system
After installing or replacing filters"Aquaphor OSMO-50" (sp. 5) you need to flush the system. This will prevent coal dust from getting on the membrane. To do this, you also need to use the instructions that come with the kit. First, the water is turned off, the tap on the kitchen sink is opened.
Then you need to disconnect the JG tube from the pre-cartridge unit. For this, the locking latch is taken out of the sleeve, pressed on the end and the tube is pulled out. It must be disconnected from the storage tank, and then connected to the outlet fitting of the unit with three cartridges.
The end of the tube is moistened with water and inserted into the seat until it stops. Drain the liquid through the tap for purified water. The procedure is carried out for 15 minutes. To do this, open the previously blocked flow of tap water. After this procedure, the valve is closed and the system is closed again.
Tube JG is disconnected from the unit with three precleaner cartridges. She is again brought to the storage tank. It is fixed with locking clips. The next step is to install the membrane. If you do not follow the above procedure, it will become clogged with coal dust. As a result, the throughput of the system and its cleaning properties will be minimal. The membrane will need to be changed.
System start
It is important to run reverse osmosis correctly. The inlet valve must be open. You need to inspect the system for leaks. All joints, threaded connections are carefully inspected. If drops of water are visible, tighten the bolts and other connections more strongly. But tooyou can’t be zealous, as you can break the thread.
The clean water faucet handle needs to be opened. After a while, the filtered liquid will begin to drip. Then you have to wait 40 minutes. After that, the tap is closed. You should wait another approximately 1.5 hours. During this time, the storage tank will be filled. The duration of this process depends on the characteristics of the membrane filter.
When the tank is full, you need to completely drain the liquid from it. When the flow of water weakens, you can close the tap. It is highly recommended not to drink water that the system would filter the first and second time. The procedure is repeated again.
Only after the third filling of the tank with water, it can be drunk and used for cooking.
During the first week, periodically check the system for leaks. At the beginning of its work, reverse osmosis can filter water that has a milky tint. It contains many air bubbles. They are forced out of the system during operation. Over time, the water will acquire a normal color, become transparent. The presence of air does not reduce the quality of the purified fluid.
Replacing the carbon filter and mineralizer
To replace the carbon filter, which is installed after the membrane, the water is shut off. By opening the tap for clean water, you need to relieve pressure. The JG tube is disconnected. Then you can dismantle the post-filter by removing it from the holder. To do this, pull the cartridge up with force. The new post-filter is installed in the seat in the reversesequences.
To replace the mineralizer, perform the same steps. The water is blocked, the tube is disconnected from the cartridge, which needs to be replaced. The mineralizer must be pulled up with force. A new cartridge is installed in its place. The steps for connecting all elements of the system are performed in the reverse order.
