In modern conditions, partitions in apartments are being installed more and more often. Many of us want to re-plan our home, introduce unusual shapes into the interior and implement the design solutions we like. Initially, it is worth considering where the partition in the apartment will be placed. Next, the material of its manufacture is selected. It can be magnesite sheet or OSB-plate. But the most common material for creating a partition is drywall. It is versatile in use and easy to install, no matter the room.
The plasterboard partition in the apartment must be installed in compliance with very important rules. First you need to assemble a frame from a metal profile, and place all the necessary communications inside it. Then sheathing is made with plasterboard sheets, on which a finishing coating can be applied. It can be wallpapering or painting. Very often, the owners of houses choose exactly radial interior partitions. They look stylish and aesthetic, thereby emphasizingtaste and originality of the owner.
Installation of partitions in an apartment can be divided into stages. The first step is to mark the location of the profile on the walls and floor. In the calculation process, it is necessary to take into account the severity of the details that will affect the drywall construction. Next, a sealing tape is attached to the back side of the metal profile.
In order to install interior radius partitions, special holes are drilled at a distance of about fifty centimeters. The next step involves attaching the frame to the floor. Next, a wall profile is attached to it and leveled with a plumb line or building level. This stage is completed by fixing the frame to the ceiling.
The third step of installing the partition is placing the communication networks inside. To do this, a corrugation is laid in the voids formed between the uprights. It is designed to protect the cable from any damage and prevent fire in the event of a fire. This is facilitated by the evolved inert gas. If the partition in the apartment contains a corrugated box, it will be easy to replace the cable that has deteriorated. To do this, you need to tie a new cable at one end, and pull it out of the structure at the opposite end.
The fourth stage is to sheathe the frame with drywall. For attaching it tometal profile used self-tapping screws. It is necessary to ensure that they enter the frame to a depth of at least one centimeter. In this case, the head of the self-tapping screw should sink one millimeter into the sheet of metal itself.
Before the partition in the apartment is completely sheathed, its interior space is filled with polystyrene foam or mineral wool. The drywall is then attached to the second side in the same way.
The final stage of the installation involves the application of finishing putty on the surface and subsequent polishing of the layer. When all the main work is completed, you can paste over the partition with wallpaper or paint it in the desired color.
