It will not be a secret for anyone that every owner of his own home tries to create all the necessary conditions for the most comfortable pastime. One of the most important conditions for comfortable living for a modern person is the presence of a working sewer system. In some cases, due to the appearance of blockages, it can fail. This situation requires urgent decision-making aimed at eliminating the problem. How to clear a clog in a toilet? Let's try to figure it out.
Reasons
Let's take a closer look at this. Before you learn how to clear a blockage in the toilet if clogged, it is worth considering the main causes of the problem. Trouble usually happens at the most inopportune moment. There are many circumstances that can cause this inconvenience. The blockage in most cases occurs as a result of foreign objects entering the toilet. Oftenthese are rags, sanitary pads, diapers and even toys. The reason may also lie in the improper installation and design of the sanitary ware. The sewer damage may also be the problem.
Clogging can appear both immediately after the installation of the equipment, and after a certain time. The reason may be s alt deposits accumulated in the system. Over time, they completely block the flow of water and cause an emergency. Sometimes the location of the blockage can be extremely difficult to find. The problem can also be caused by errors made in the design of the system. Pipes sag over time. As a result, there are areas in which water stagnates. Also, blockages can occur when using low-quality adapters and fasteners. Non-compliance with the parameters of pendants also causes unpleasant consequences.
What causes blockages?
This issue should be given special attention. Surely many have encountered such a nuisance: the toilet is clogged. What to do? Ways to solve the problem may be different, but first you need to figure out why it arose. Experts do not recommend lowering any foreign objects into the sewer. The only exception is soluble toilet paper. Other items can simply clog pipes. Do not flush the leftovers and waste left over from the cooking process down the toilet. The same rule applies to tea leaves. Sewer pipes such particles can clog like cement.
No wayconstruction debris should not be dumped. This is guaranteed to lead to clogging. Leftover food should also not be flushed down the toilet. Over time, they can cause quite severe blockages. Do not flush diapers, pantyhose, sanitary napkins, tampons, rubber products, bags, and other trash.
Determine the blockage
What should I pay attention to? How to clear a blockage in the toilet yourself? The first thing to do is to establish where the source of its occurrence is located. To do this, you will have to study the device of the sewer riser in the kitchen and bathroom. It should be borne in mind that the blockage can be general. For residents of an apartment building, the problem becomes joint in some situations. If the toilet is clogged in a private house, then the reason may be outside it, for example, in the place where the pipes go into the cesspool, or in the gap where the local sewer is connected to the city. To correctly determine the site, you will have to thoroughly study the sewage system of your home. The first sign of a general blockage is the impossibility of draining water from the bathroom. If the liquid passes well while turning on the taps in the kitchen sink and draining the toilet, then you need to look for a place of stagnation.
Folk methods
How to choose the most effective and at the same time not spend a lot of time? So how do you clear a clog in a toilet? At the first sign, you can try using simple folk methods. The main thing is to act quickly andimmediately. With a simple blockage caused by a slight accumulation of deposits on the pipes, the following folk methods can be used:
- Boiling water. To eliminate stagnation in the toilet, you will need to boil a bucket of water. Its contents must be poured very quickly into the toilet strictly at a right angle. Water after such a procedure should begin to slowly descend. The procedure should be repeated several times if necessary. These simple steps will help you get rid of minor blockages.
- Baking soda. To eliminate simple blockages, you can use such a simple product as soda. To do this, pour half a pack of bulk into the toilet. After a couple of minutes, you can try to flush the water. Soda by its nature is an active alkali. It can clear the blockage and ensure the normal operation of the equipment.
- Citric acid. A solution for cleaning pipes with this component is prepared as follows: 1-2 packets of citric acid (about 40 grams) are diluted in a liter of boiling water. If metal pipes are used in the system, then the solution should be poured directly into the drain. It is better not to pour boiling water into plastic pipes. Wait until the solution cools down to at least 70-80 degrees. The acid will create an aggressive environment that can destroy deposits on pipes. This method usually takes 10-20 minutes to clear the blockage. The procedure can be repeated if necessary.
- Soda + vinegar + boiling water. To use this method, you must first remove the water from the toilet. You can leave only a small amount directly near the drain. There you need to pour halfpacks of soda. Try to push it as deep as possible. After that, you need to pour a glass of vinegar there. It is better to use a 9% solution. 20 minutes later, simply fill the drain hole with boiling water and try to flush the water. If the toilet is equipped with a connecting corrugation made of thin plastic, then boiling water cannot be used. In this case, you need to use hot water.
How to clear blockages with mustard?
There is another simple folk method that allows you to quickly and easily deal with blockages. It is based on the use of mustard. To implement it, it is necessary to heat 10 liters of liquid. Dilute 5 teaspoons of mustard in water. The resulting composition is poured into the toilet. After a few minutes, it will only be necessary to drain the water. If the toilet cannot be cleaned at once, the procedure should be repeated.
Use of chemicals
On shop windows today there is a large selection of various means to eliminate blockages. Especially popular are "Mr. Muscle", "Mole", "Floop", Tiret. How to eliminate blockage in the toilet using these compounds? Before proceeding with any action, you need to carefully study the instructions. Remember the security measures. Many products contain aggressive substances that, if in contact with mucous membranes or skin, can cause serious harm to your he alth. Therefore, when using such products, be sure to wear rubber gloves. Also, when using dataformulations should be thoroughly ventilated.
How to clear clogged pipes in a bathtub, sink or toilet using special tools? Pour the required dose down the drain. You can determine the dosage by reading the instructions. After a while, simply wash off the substance with a stream of water. Ready-made products also help with blockages in the sewer system. However, it should be borne in mind that potent drugs can cause serious damage to metal or plastic pipes. It is not recommended to use several products at the same time, as this may cause an unexpected chemical reaction.
Mechanical methods
So what's special about them? What to do if the toilet is clogged? How to clean the blockage without resorting to the services of specialists? If the problem is caused by a foreign object, then mechanical methods will most likely have to be applied. They are pretty simple.
Here are some of them:
- Cleaning with a plunger. Slight blockage can be removed using a plunger. It should have a cone-shaped nozzle. Its diameter is at least 10 cm. Before work, it is recommended to fill the toilet bowl with water. The plunger must be placed in the drain hole. Holding it by the handle, you need to make strong pressure several times. After that, pull out the plunger sharply. The procedure must be carried out several times until the blockage is completely eliminated.
- Using a bottle. Quite an interesting method. How to clear a blockage in the toilet with a plastic bottle? The principle of operation in thiscase, the same is used as in the method of cleaning with a plunger. First you need to prepare the bottle: just cut off the bottom.
- Using "doll". This homemade device is a cloth bag filled with sand. A long rope is attached to it. Such a device is lowered into the toilet, holding the rope in his hands. After that, they press the drain and wait for the flow of water to carry away the device. Next, you just need to remove the doll from the toilet by pulling the rope. The heavy weight allows it to break through the resulting blockage.
- Cleaning the torso. You can use a rope to clear the blockage. This product has a long hollow shaft and is highly flexible. Its handle can be rotated. At the end of the axis is a spiral process. It is attached to the cable with a flexible tube. The end must be lowered all the way into the hole. After that, with slow movements, rotating the handle of the device, the cable must be pushed into the shutter. When the procedure is completed, simply rinse the system with hot water. Such actions will help to quickly deal with a blockage in the sewer. It is best to use a special cable, which can be purchased at a hardware store. The main thing is to choose the right diameter and length.
Now you know what to do if the toilet is clogged, how to clean the sewer at home using mechanical methods.
Using film
How to clear a blockage in the toilet yourself? There is a rather interesting way. It is suitable for removing foreign objects fromdrain hole. To use it, you need to take a wide adhesive tape. The circle of the toilet is wiped dry, after which strips of adhesive tape begin to be glued onto it. The main thing is to glue them tightly to each other so that a continuous coating is formed. After the entire toilet is pasted over with adhesive tape, you need to drain the water. It will be enough to make only a few strong pressures on the makeshift cover, and you can easily break through the blockage. All you have to do is remove the tape from the seat. You can also use a specialized film to eliminate blockages.
Professional help
How to clean a blockage in the sewer? If none of the presented methods helped to achieve the desired result, then you should seek help from specialists. They will help you find the right solution to the problem. Sewer service companies have equipment that allows you to quickly remove blockages of any complexity.
Prevention
What can be done to never again look for the answer to the question of how to clear a blockage in the toilet? There are a number of preventive measures that help to forget about blockages forever. Firstly, all plumbing equipment in the house should be used only for its intended purpose. There should not be any foreign objects in it. Secondly, professionals advise regularly using specialized chemicals to prevent the formation of blockages in pipes. In addition, it is recommended to clean once a week using boiling water.or plunger.
How to clear a blockage in the toilet? The recommendations of experienced professionals will help you easily and simply solve the problem. However, in difficult cases, it is better to immediately contact professionals directly. Most blockage problems can be avoided with regular maintenance.
Conclusion
Many people have probably faced such an unpleasant problem as a clogged sewer. How to clear a blockage in the toilet yourself? Several methods can be used for this purpose. If we are talking about a fairly simple blockage, then you can try folk remedies. Sometimes compositions prepared on the basis of soda, citric acid and vinegar do very well with deposits on the walls of pipes. For more complex cases, special chemicals are designed. When using them, the main thing is to follow the instructions on the package. To eliminate heavy blockages caused by foreign objects entering the sewer, you will have to use mechanical methods. It can be either a simple plunger or special professional devices.
