Recently, the trend of installing a wall-hung toilet has become fashionable. This installation option is considered quite affordable. Among other things, it is more hygienic, since the hostess will not have problems washing the floors. Some home craftsmen express the opinion that the hanging toilet, the price of which may be slightly higher than usual, is an unreliable design. It's not like that at all. Before purchasing, you will be able to independently choose the dimensions of the wall-hung toilet with installation, this will effectively distribute the free space.
The claim of unreliability is not justified. Using the standard frame, you get a guarantee of safety, among other things, it can withstand up to 800 kilograms. If you use fasteners without installation, then it will withstand 400 kilograms of weight. If you decide to purchase such plumbing equipment, then you need to familiarize yourself with the installation procedureworks.
Preparing for installation
Hanging the toilet, the price of which can vary between 2000 -15000 rubles, should be mounted after the preparatory work. In the process of manipulation, you will have to use a finished frame, which is to be fixed, and then assemble all the component parts. The master must take into account that the finished frame is quite expensive, so the entire installation option will be costly.
The wall mounted toilet, the photo of which is presented in the article, can also be installed to a monolithic base made of concrete. In this case, the device must be mounted on the outlet of the rods, which are attached to the load-bearing wall. The function of a monolithic concrete base is to hold the lower part of the plumbing fixture. The concrete structure must contain a coupling, which is designed to ensure the drainage of sewage.
Work technology
If you decide to purchase a wall-hung Vitra toilet, you will first need to mount the drain coupling. After that, the master must determine the height at which the device will be located. If necessary, you can make adjustments. To do this, the coupling is cut off, or the pipe is built up using a pipe. Professionals recommend using formwork panels with a margin of 5 centimeters or more.
If you use the installation instructions, you should know that it implies the need for the most accuratemeasurements between adjacent mounting holes. Most often, 20 centimeters is chosen as the optimal figure. A board, OSB or chipboard is perfect as an account.
Master's recommendations
The Villeroy hanging toilet is installed according to the technology described in the article. It should be noted that before making holes, you need to attach the product to the formwork. This will allow you to check how well the markup is done. The maximum deviation is a figure within 5 millimeters.
The next step is to cut the threaded rods to the desired length. In this case, add up the thickness of the recess in increments from the toilet bowl to the wall, adding to this figure the thickness of the plumbing fixture at the installation point and the length of the free end, which will be necessary for accurate tightening of the nuts.
Installation works
Initially, you have to determine the installation height of the suspended plumbing fixture. Fixation will be carried out through the wall, while it will be necessary to prepare the M-20 nut, as well as the washer. This method can be called as simple as possible, as well as universal, while the walls can be based on absolutely any material.
The main condition is the resistance of the walls to bending. You will be faced with the task of drilling through them. After that, you have to install the rod and put a washer on it. At the last stage, tighten the nut.
Fixing the toilet to the most durable walls
If you purchased a wall-mounted toilet bowl with a microlift, then itcan be installed to very strong walls, without the master having to make a through hole. The rod can be fixed with an adhesive designed for concrete. In this case, it is a chemical anchor.
This approach will ensure maximum reliability of fixation in walls that are made of durable material, namely solid or hollow bricks, concrete blocks or wood.
Wall strength
The wall must be designed to withstand medium level loads of 400kg or less.
If the walls in the bathroom are made of heat-insulating aerated concrete with a density of less than 400 kilograms per square meter, then fastening using this technology should be abandoned.
Work methodology
In order to install the Delfi hanging toilet, you need to drill a hole, the depth of which will be 15 centimeters. It will need to be well cleaned of the resulting dust, and then pour the glue inside. The master must install the rod, and then mount the shields. The first of them is the central one, in which the holes for the rods are located. The second shield is the one on which the toilet bowl will be fixed, while the third one will become the side one - when it is attached, you can close the openings for the output of the coupling.
What to look out for
It is important to analyze how well the shields are placed. To do this, use the building level. The next step will be the installation of rods for fixationplumbing fixture. In order for the formwork to become stable, you need to tighten the nuts that will hold the hanging device.
Nuances of the work
When installing the toilet, the photo of which is presented in the article, you need to check how accurately the markings were made. If there is a need, you can make some adjustments until the concrete is poured. In order to form a recess in the concrete, you need to fix a piece of foam, this will later allow you to connect the drain to the device.
Pouring concrete
To carry out this stage manually or with a concrete mixer, you need to prepare a special mixture, which will consist of crushed stone, cement, sand and water. It is important to cover the threaded rods with a film to prevent the mixture from accidentally getting on them. In order to compact concrete, it is necessary to pierce it, which is especially true for corners. Formwork should be left for one week at room temperature.
Feedback on connection features
Before you go to the store, you should check the wall-hung toilet kit - only in this way you can carry out the correct installation. As home craftsmen note, a corrugation with a diameter of 4 centimeters must be installed in the recess of a plumbing fixture. The water is drained to the stop, and after that the free gap must be filled with a universal sealant. Experts advise: to fix the corrugation, it is necessary to withstand for 3 days at room temperature. Home masters recommend: beforeto install the toilet, you need to use silicone sealant, which is applied to the joints of the device with the rubber ring of the corrugation.
The toilet should be put on the mounting outlets of the rods, and then install the washers and tighten everything with nuts. This design is aged for a day, after which you can start connecting the drain tank to the toilet using a flexible corrugation. At the final stage, as consumers note, you can install the cover of the plumbing fixture. On this, we can assume that the installation is completed.
Toilet dimensions with installation
If you are interested in the dimensions of the wall-hung toilet with installation, then you should look into this issue more carefully. Here it is necessary to pay attention to some nuances. Manufacturers emphasize that the dimensions of this plumbing fixture are much smaller compared to the dimensions of a traditional toilet bowl. This belief can be considered right and wrong at the same time.
If you plan to install such a device inside the Khrushchev bathroom, then, alas, you will not be able to win with the dimensions. Everything is due to the fact that the installation will occupy a certain space in the false wall. After installation, the dimensions of the wall-mounted toilet with the installation will indeed seem smaller, however, the room itself will be reduced in size due to the fact that the communications will be hidden behind the partition.
For owners of private houses where there is no shortage of freespace, the use of a suspended plumbing fixture is the most optimal solution. This model looks compact and modern.
Conclusion
If you are interested in the size of a wall-hung toilet with installation, then you should consider that such a device will take up more space in the bathroom compared to conventional analog plumbing fixtures. However, the room will look aesthetically pleasing, this must be taken into account when choosing a design. This is the only way you can arrange an interior that will look good and suit all household members.
