Laminate is a fairly practical material that is used for interior decoration. People are accustomed to seeing it as a floor finish for premises for various purposes. However, recently a technology has become widespread, which involves the installation of this material on the surface of the ceiling. As a result, it is possible to create an attractive and unique interior design that is distinguished by coziness and comfort.
Such a ceiling for a long time will retain its original attractive appearance, in addition, it does not dust at all and is cheaper compared to eurolining. The latter is appreciated by those who wish to save money on repairs.
The method of work is very simple, any master who has held a hammer in his hands at least once in his life will be able to handle the work. The ceiling, sheathed with laminate, additionally insulates the room, which is especially important for those cases when foam plates are placed in the crate cells. Whereas the grooves need to be filled with mounting foam. This measure eliminates the accumulation of condensate in the cavities of the crate. Dampness of such a system can only be feared if there is a leak from above.
Why choose laminate flooring?
Laminate today has become quite widespread among the modern consumer for the reason that it is durable and does not require repairs during operation. This is true only if the conditions for using the coating are met, and the installation work is carried out in accordance with all the rules. With a wide selection, you can purchase panels with different colors and textures that will suit almost any interior.
Master's Tip
The laminate on the ceiling looks very attractive. If you also decide to decorate the room with this finish, then it is important to make sure that the roof decking is made of modern materials and is reliable. It is not recommended to make repairs using this technology if your apartment is located on the last floor of the house, and the roof is made of roofing felt.
Hammer striker
If you want to see a laminate on the ceiling of one of the rooms of your apartment or house, you can do the installation of the material yourself. To do this, you should use a striker under the hammer, which will allow you to carry out the sheathing in a short time. Use it to scorenails are much easier. Masters make such a tool on their own, you can use a center punch for this, if there is none, you can use an 8 mm metal bar. One end of it with an emery wheel must be sharpened into a truncated cone; it does not have to be even at all. At its end, a patch of 4 millimeters should be formed.
After cutting a wooden block, drill a hole for the bar so that the workpiece does not hang out in it. It is important to carry out these works in such a way that the element has to be driven into the wooden handle with a hammer. The workpiece is driven into the hole with a patch up. In the central part of the latter, you need to make a mark for drilling, and then on a machine or a drill at low speeds, you should drill a hole 0.5 millimeters smaller than the patch itself. A small hole should be drilled under the nail head. If you use a center punch, then it will be much easier to perform these works, you should remove the point on the emery, and then drill a hole, as described above.
With the help of such a tool, a nail can be hammered into a blind hole to the end. If you tilt the striker, then the fasteners can be driven completely. However, before use, fasteners are driven in by 2/3. In order for the laminate on the ceiling to look as aesthetically pleasing as possible, it is very convenient to use a striker, which is also useful for other housework. If we compare the works where brackets are used when fixing the panels of the tongue-and-groove laminate to the lathing system, with fastening the clamps to the logs with the help of nails and a striker, thenthe latest technology will be easier.
Preparation for work
Laminate ceilings will look great if done right. The plaster is removed if its layers are swollen, and the thickness is more than 6 millimeters. Next, you can begin to calculate the distance between the elements of the crate, taking into account the dimensions of the existing laminate. Lathing slats can have a thickness of 15 millimeters. For a width of 30 millimeters, it is necessary to equip the crate so that the edge of each panel falls on the central part of the frame system element. In this case, the dimensions of one cell should be 500x500 millimeters.
Cells of the crate do not have to be square at all, they can be rectangular. A rail is laid along the perimeter of the ceiling, the width of which is 50 millimeters. If the ceiling is made of concrete, and the wiring in it is laid in the gaps between the plates, then the system should be left intact. If the wiring is covered with plaster, and after removing it, the wires are outside, then they should be covered with small plastic boxes, which are reinforced with drops of building silicone every 12 centimeters.
Final stage of preparation
Finishing the ceiling with laminate can only be done after preparation has been made. At this stage, it will also be necessary to mark the future lathing system with a pencil, after which holes are drilled for mounting nails, the diameter of which will be 4millimeter. The distance between fasteners can vary from 400 to 600 millimeters. The length of the nails should be calculated as follows: 30 millimeters should be added to the thickness of the battens.
Creating a batten system
If you don't know what the laminate flooring will look like on the ceiling, you can see the photos of the interiors in the article. Only after that it is recommended to start work. At the next stage, you can begin fastening the elements of the crate. To begin with, lags are laid. Close to the row of holes you need to attach a rail on which marks are made. The element is lowered down to drill holes for nails. Next, the workpiece rises to the ceiling, and the nails can be hammered to the end. After the logs are strengthened, you can fill the crossbars, for laying the wiring in the elements of the crate, it will be possible to cut the grooves in place.
Laminate installation
Laying laminate on the ceiling is carried out in the next step. In this case, you need to retreat around the entire perimeter of 20 millimeters, for this purpose wide slats are used along the edges. No room is protected from dampness, it happens precisely from the ceiling. Finishing material from exposure to moisture can swell, it will have nowhere to move to the side, cracks will begin to appear. Mounting the laminate on the ceiling can be done in different ways, if we are talking about a tongue-and-groove board, then you can use kleimers or small nails that are installed obliquely into the groovesheet pile. This must be done before installing the next panel. If you decide to cover the ceiling with a laminate that has a simple edge, you can use small nails, installing them every 25 centimeters, retreating a quarter of the width of the lath from the edge.
Places for installing fasteners should be marked in advance on the floor, nails are driven into the thickness of the panel. It will be much more difficult to make this work for the canopy. In place, the nails are driven flush with a striker. After a few days, when the caps darken, they will no longer be visible. If you are thinking about how to fix the laminate to the ceiling, then before installing the next panel, it is recommended to lubricate the corresponding sections of the crate with liquid nails, you can use wood mounting glue, which contains sawdust. With it, it will be possible to miss the seams if the imitation of beams is not provided. When laying laminate on the ceiling in a wooden house, liquid nails should be selected according to the sample spot on the lid of the jar.
Recommendations for work
Another way of attaching the laminate to the ceiling surface is to install supporting wooden beams. If we take into account the moment that small nails will be invisible, the method described above is more advantageous. When it is planned to install beams with lamps on the ceiling, wiring should be brought out under them through the holes in the sheathing panels. For this purpose, you can use the notches along their edges.
Final works
Laminate on the ceiling in the bathroom is installed quite rarely, but if youdecided to resort to this method, then you should choose a moisture-repellent material. At the final stage, the perimeter of the room is decorated with skirting boards. These elements are installed using liquid nails, this will be enough for skirting boards. The fastener heads in the holes must be sealed with liquid nails or left as decorative elements.
