Housing improvement is a very painstaking process, since such an occupation requires not only serious financial investments, but also patience. You can make your home cozy in a variety of ways, and one of them is to stick non-woven wallpaper on its walls. The pros and cons of this finishing material will be described below, but first you should tell in more detail what these decorative elements are and what characteristics they have.
Features of non-woven wallpaper
Sometimes it is difficult for an inexperienced owner to outwardly distinguish this finishing material from others, but it has its own specific properties. The principle of creating these wallpapers is as follows: the vinyl layer is sprayed not immediately directly onto the paper, but onto a special base - interlining. This material is made from fibers that are pressed in a special way. It should be noted that the standard width of its stripes is 1 m 6 cm, which is almost 2 times higher than the standard figure.
Most often non-woven wallpaper, the advantages of which are significantlycover their negative sides, are supplied to the market unpainted, which allows to implement any design solutions. In addition, hand painting greatly enhances their aesthetic properties and makes the living space even more unique.
Advantages of non-woven wallpaper
As mentioned earlier, such a finishing material as non-woven wallpaper has a lot of pluses. Their main advantages include the following:
- This material is highly breathable, so that mold caused by dampness does not appear on the walls. But here it is important to remember that when vinyl is applied to such wallpaper, this property disappears.
- During operation, their shape does not change, they are not deformed either after drying, or throughout the entire service life.
- Non-woven wallpaper is a material that is environmentally friendly and safe for human he alth.
- Very often this finishing element of the interior is purchased for painting. Such processing does not affect the integrity of the wallpaper in any way and only strengthens its structural integrity.
- Sticking this material is very easy. Non-woven does not require pre-treatment with glue, which greatly facilitates the joining of the strips.
- With these products, you can easily decorate any type of surface, whether it be concrete walls or partitions made of plasterboard, chipboard or wood.
- If you want to change non-woven wallpaper for a new material, it is very easy to remove them, here you don’t even need to pre-soak the material. They take off quicklyand without any problems.
The main disadvantages of non-woven wallpaper
However, not all characteristics of this material can be called positive. If we talk about such a product as non-woven wallpaper, they certainly have disadvantages. Let in a small amount, but they are still there.
So, if it is a simple interlining, not covered with either paint or vinyl, this finishing material cannot be washed at all, otherwise there is a high probability of completely ruining the coating. In case of contamination, only vacuuming is allowed.
In addition, it is very problematic to purchase non-woven wallpaper inexpensively, since, due to the high quality of the material and the relative complexity of its manufacture, the price for them, of course, is quite high.
Next, consider the varieties of this decorative element and the procedure for sticking it on the walls of the dwelling.
Types of non-woven wallpaper
If this material is an independent wall covering, there is no relief on it, only some pattern is possible.
Sometimes non-woven wallpaper, the pros and cons of which have already been described above, are used only as a basis for vinyl stickers. This kind of material is different in that it does not have some useful properties. These wallpapers are still able to reinforce wall surface defects, they are just as easy to stick, but the environmental parameters will be significantly lower. In addition, suchthe product will pass air much worse, which is fraught with premature damage to the material.
Many owners choose non-woven hot stamping wallpaper as the main element of room decor. This material is very beautiful, it has an unusual appearance and, last but not least, a long service life.
Tools for pasting a room with non-woven wallpaper
This process requires the following list of building supplies:
- Standard medium to short pile paint roller. Requires this glue application tool.
- A small brush with which you can coat the joints.
- When gluing materials such as non-woven wallpaper onto walls, surface imperfections in the form of bumps and protruding sections must first be removed. You can get rid of them using a rubber or plastic roller, which easily smooths out any flaws.
- Regular building level and pencil. With their help, it is necessary to apply vertical markings on the desired surface.
- Glue container.
- Whisk or any other tool for stirring the fixing base.
- Knife (allows you to cut off excess parts of the wallpaper).
With all these tools at hand, you can get to work.
Preparatory measures before sticking non-woven wallpaper
The whole process must start from what is available in the roomwindow. First you need to apply markings on the wall for the first strip, but experts strongly do not recommend drawing a bright line with a marker, since this material absorbs any dirt very well - it is quite possible that the trace cannot be removed even after staining. It is best to draw a thin dotted line with a pencil.
In such a finishing material as non-woven wallpaper, the disadvantages are also that the adhesive composition for them must be special and have the necessary degree of ductility. It is necessary to apply the fixing base exclusively on the surface of the wall. If the finishing material itself is also treated with glue, there is a high probability that after drying it will shrink, and this will lead to the formation of small but noticeable cracks.
Features of the process of pasting a room with non-woven wallpaper
Professional craftsmen do not recommend cutting finished rolls into separate strips. You can fix the wallpaper on the wall immediately after applying glue to it, and with a high degree of probability you will not have to adjust them. The main thing is to decide in advance where the material has the upper and lower parts.
The overlap on the ceiling should be at least 5 cm so that the slope is not too noticeable, and the bottom of the wallpaper must be cut exactly at the level of the plinth. Each subsequent strip must be connected to the previous one strictly end-to-end. Any excess adhesive should be removed with a clean sponge soaked in water.
Fixing these decorative items on the wall can be donedifferent ways. But do not forget that when purchasing a material such as non-woven wallpaper (the pros and cons of a photo of a particular sample are not able to reflect), it is very important to carefully visually study the structure of the desired product. Only in this case, you can be completely sure of the quality of the product.
The principle of finishing the ceiling with non-woven wallpaper
This work is not much different from decorating the walls, moreover, it is even easier to perform.
To begin with, draw a line parallel to the wall on the surface of the ceiling. After that, you need to apply glue to the desired area and, having attached a roll of wallpaper to it, slowly roll it out, helping yourself with a roller. The main difficulty is to ensure that the edge of the material runs along the intended line. Having reached the opposite wall, you just need to cut off the canvas, and then proceed to the next segment.
When sticking material such as non-woven wallpaper on the ceiling, some owners notice the pros and cons of such a solution already while living in a room decorated in this way. Perhaps the room will become darker, but this method of finishing will allow you to create a housing that is unique in its external characteristics and emphasizes the individuality of its owners.
How to paint non-woven wallpaper?
First of all, you should decide on the composition. So, non-woven wallpaper paint can be as follows:
- latex;
- water-based;
- acrylic, which by its characteristicsquality and durability is the most reliable.
The finishing material that is intended for painting is equipped with a vinyl coating on the outside, which can be either smooth or foamed in a certain way. The second option requires more careful processing, since the composition may not fit well on all protruding areas. Many owners, painting non-woven wallpaper, find the pros and cons of this work at different points. So, this process is quite time-consuming, however, correctly performed work guarantees a high-quality result and the preservation of the coating over a very long period of time.
