In order to use the grinder, craftsmen quite often acquire a frame. Such an addition to the tool can be purchased or made independently.
Is it worth buying a bed
Beds for angle grinders are of different production, for example, Chinese. It is preferable not to purchase such elements, since they are very short-lived, because they are made of sheet steel using stamping technology. After the tool starts to work, slight vibrations make the machine unstable, and therefore dangerous. It is best to make such a rack yourself, while you will be sure of its quality and reliability.
Safety rules
If you decide to start manufacturing a bed for angle grinders, then first you need to analyze all the available designs that exist on the market. Most often you can find beds that are designed fordisks of 125 mm: it is already dangerous to use a 230 mm angle grinder in tandem with such equipment, since quite often it becomes necessary to remove protective covers. Among other things, such racks for angle grinders suggest that the master will stand directly in front of the disc - this makes you neglect the safety rules. If you decide to design the machine yourself, then you need to use exclusively high-strength materials for the protective casing. A do-it-yourself bed for an angle grinder is often made using plexiglass so that the screen does not obstruct the view, but it is forbidden to use materials that can be destroyed by mechanical stress. It is preferable not to manufacture structural elements using improvised materials, but to buy finished products that can provide the highest degree of protection.
For the reason that the grinder is considered one of the most popular tools on the farm, it is preferable for her to make the most reliable bed, as it will be used in tandem with the tool very often. It also justifies the independent production of this addition to the grinder that the factory-made beds are quite expensive. Moreover, it is not possible to use the unit for traditional cutting work. It is for the reason that the cutting tool assumes the possibility of performing many functions that the grinder stand was invented. Beds for angle grinders can only be used if necessary, otherwiseIn other words, the main tool can be used in many ways, while the bed can be left for a while. It is important to remember before starting manufacturing that the equipment mount must be located in a place that is specially reserved for this, which will prevent injury. In order to make such a tool, you need to have some knowledge, experience, as well as a certain set of materials and tools.
Preparatory work
Beds for grinders with their own hands are made of different materials. Among them, wood or metal can be distinguished, which depends on the scope of application. Most often, shaped steel pipes are used for the manufacture of the bed. This material will be able to provide the most increased strength and reliability of the elements. However, this solution has certain disadvantages, which are expressed in the fact that it will be necessary to use electric welding. As an alternative solution, you can use profiles at the base of the rack, but in this case the problem remains. It will be necessary to use a welding machine, which is not always available. However, if you think about it, almost all welding work can be replaced by the use of bolts. For their installation, it will be necessary to prepare holes by drilling. This option will be the most suitable, because the master will have an excellent opportunity, which is expressed in the fact that the machine can be disassembled if necessary. This method is recommended ifdo-it-yourself frame for a grinder will be made of wood.
If you decide to use wood, then when choosing lumber for this purpose, you should carefully control the quality of the material used - it must be strong enough, resilient, and also well dried.
Production Features
If you will be making a home-made frame for a grinder, then you must first prepare a drawing of the future rack. To do this, you will need to study the principle of operation of the model, which you can find on sale. It is important to understand how to fix the tool correctly. When drawing up a drawing, you do not need special skills. It is enough to accurately determine the dimensions and transfer them to paper. After the drawing is ready, you can begin to prepare the material. If you decide to use profiled pipes, then you will need to cut blanks and make the necessary holes. Before proceeding with cutting the pipe, you need to clarify the dimensions, which will prevent damage to the material.
Master's Tip
If you will be making your own frame for a grinder, the drawings of which you have already prepared, then it is preferable to use wood if you do not want to spend a lot of time and effort on manufacturing. However, it must be remembered that the process will be easy, but the machine will turn out to be not so durable compared to metal. You can select only those materials that are in the processoperation will not be subject to deformation.
Production
A self-made frame for a grinder, the drawings of which have been prepared, should be based on a platform that is fixed on the surface of the desktop, and bolts should be used. This will eliminate vibrations. In order to realize the simplest design, it is necessary to use steel, as well as corners. The design will be very simple. It is important to complete the rack with an articulated handle that will fix the tool. On this we can assume that the design is ready.
