Cars at exhibition events shimmer under the illumination of lamps and spotlights, and their surface is distinguished by a bright sheen. This effect gives the polishing of the body. It can be carried out at home. This will require a drill and a polishing attachment.
Varieties
There is an extensive range of nozzles that are suitable for various surfaces, the most common are sponge-like, abrasive, having different degrees of grit and felt with a soft surface. Conventionally, they are classified according to the version of the design into petal and surface grinding types. The latter are made in the form of a rubber circle (partial use of this material is also possible) with an additional coating for processing.
They are made, as a rule, from dense foam rubber or felt of various diameters. The petal polishing nozzle is characterized by greater productivity and, as a result, high cost. You can also find kits for treating the surface of the body, which consistof several elements with different purposes and complexity of execution.
Shape
Nozzles for car polishing are usually made in the form of a cone or circle. They often come as a supplement to polishes, along with polishing tapes and sheets. There are many options that are used for body work, jewelry or optics.
These elements ensure that the aesthetic and technical characteristics of the car are preserved, as any vehicle will look much better after a thorough washing and polishing.
Rigidity
A conventional drill often acts as a grinder. But it is able to provide high-quality work only if it is supplemented with suitable components. A variety of materials are used for polishing wheels. The most common attachment for a drill for polishing a car is made of felt or foam rubber. The choice of one or another option is determined by the degree of softness of the polishing paste. Manufacturers produce wheels in different colors, according to their hardness:
- The softest polishing tip is black;
- orange elements are suitable for all kinds of pastes;
- hard compounds applied with white circles.
DIY polishing tips
Sometimes it is not possible to find a suitable option in the store, in this case, if there is a hard circle, you can make a soft thicklayer and place it between the Velcro and the plastic base. With the help of a clerical knife, Velcro is cut off, where a soft layer is glued, which is an ordinary bath sponge. It should be noted that in the course of work, individual elements may be displaced and, as a result, a violation of the overall symmetry.
Also a handy drill bit for car polishing comes from a felt disc used in polishing machines and machines. First you need to make a pin with a suitable diametrical size and apply a thread to one of its sides. A polishing disc is fixed on it, surrounded on both sides by a wide nut and restrictive washer. The formation of such a device does not cause any particular difficulties, while it is suitable for processing many types of surfaces.
Features of use
Progress does not stand still, and today the nozzle for a polishing drill is presented in various designs. New compositions for production are constantly appearing, which are distinguished by lower cost, but at the same time their reliability and quality remain at a high level. Devices are sold in any stores that present automotive products. It is worth being careful when choosing, as it is easy to make a mistake, and as a result, the purchase will turn out to be inappropriate.
The body elements of new cars are produced using the latest technologies. Anti-corrosion compounds and paints are applied to the metal surface,wear resistant. Their warranty period is about 15 years. But the paintwork retains its characteristics better with proper care. The nozzle for polishing a car allows you to restore the original shine, remove imperfections on the surface, while they, together with specialized compounds, will cost much less than going to the workshop.
When polishing is needed
Such processing, despite many positive aspects, can only correct a limited list of defects. It is impossible to do without a major overhaul of body elements if they have pockets of corrosion, chips or damage through which the steel frame is visible. Before starting work, it is worth carefully inspecting the machine and making sure that it is possible to eliminate defects. The nozzle for polishing a car on a drill will be effective in the following cases:
- slight shade difference after partial dyeing;
- presence of graininess and streaks of the enamel composition;
- surface has roughness, scratches and cloudy stains;
- The paint layer has become less bright and shiny.
It is worth noting that it is undesirable to abuse with polishing. Since during its implementation the paint layer becomes thinner by about 5 microns. A maximum of 20 polishing cycles can be performed from the time the vehicle leaves the factory. In this case, it is advisable to use a thickness gauge, especially when working with a used vehicle.
Whatallows you to reach the polishing nozzle
Polishing makes it possible to give an updated look to the body. Carrying out such processing is especially important when leveling small chips and in case of tarnishing of the surface. The work is carried out in two stages. First, the surface layer of paint is removed, after which polishing compounds are applied.
There is also a protective treatment that is used to reduce the negative effects of various precipitation and ultraviolet radiation. Most often, it is included in the pre-sale preparation of the car. The protective coating is distributed over the entire surface and may have a different composition with the addition of components such as silicone or wax. They form a water-repellent invisible film and provide a high gloss finish. The soft nozzle for polishing drill is suitable for used cars, on the surface of which there is no damage to the paint layer. It is also used in gentle treatment with protective agents.
Polishing agents
Before you start restoring the surface, you should take care of the availability of the necessary materials, such as:
- sandpaper;
- bike;
- foam;
- grinding compounds;
- polish.
You should carefully select the means for processing. Pastes with abrasive particles are needed to remove the top varnish layer. They are selected according to the type of cracks and chips on the surface. Preparations with a large number of particles are indispensablewhen removing noticeable defects. Compounds that give brightness to color are quite common.
Muddy stains often appear on the protective coating of new cars, in which case you can get by with a restoration paste that does not contain grinding additives.
Variety of polishes allows you to choose the right tool for any task. Thick pastes are suitable for vertical surfaces. They can handle any part of the car. Such products are often characterized by the presence of components that increase the brightness of the shade.
Polishers with a liquid consistency are only suitable for a horizontal plane, for example, for a hood or roof. The main advantage is the absence of the possibility of damaging the enamel.
Aerosols are quite easy to use. Such compositions are economical and efficient in operation. But it is worth noting that the cans, despite their size, do not contain much material.
