A plasterboard niche for a TV can be an interesting solution in the interior. With it, you can decorate a room for any purpose, whether it be a bedroom or a living room. In the implementation of this issue, you can show imagination, because niches can have a variety of sizes and shapes. You can make one of them yourself.
Interesting ideas
Before you make a niche, you can consider many different ideas for decorating this part of the room. Sometimes the design is complemented by spot lighting. Lamps in this case are mounted from below and from above. The first option is the most original. You can apply LED backlight.
Lighting elements are sometimes combined with a stereo system to create a semblance of light music. If you wish, you can finish the back side of the niche with a decorative stone, paint it or decorate it with photo wallpaper. The material is sometimes cutdifferent shapes so that they cast a shadow when the backlight is turned on.
One of the many approaches to shaping a niche is to combine several structures into one to install speakers and a TV. Under the latter, you can equip an electric fireplace, which will play the role of an interior item. Shelves around can be used to place books, figurines and boxes.
You can use LED lamps for arranging the backlight, because they almost do not radiate heat. Drywall niches for TVs are sometimes used for decorative zoning purposes. In this case, the TV will play the role of a partition in the room. It is very important at the same time that the niche is sized like a pedestal, then the installation of the device will be safe.
A rotating base is suitable for this design. You will be able to watch TV in different parts of the room. At the same time, the design is best done in light colors, because dark drywall gives the impression of a hole in the room.
How to choose sizes
Before you start making a drywall niche for a TV, you must decide on its dimensions. These parameters are among the most important. Dimensions should be 100 mm larger on each side. This will achieve an interesting visual effect.
In confirmation of this, it can be noted that it is better to install the TV on a wide surface. This also applies to speaker niches, which should be larger than the devices themselves. Locate this part of the systemdon't stand too close to the TV.
Work technology
If you decide to start making a drywall niche for a TV, you must first make a markup on the wall, and then transfer the dimensions to the drywall sheets.
The next step will be the installation of frame profiles. The main task is the installation of drywall sheets. The final work will be the manipulation of the finishing.
Marking drywall and installation of profiles
After taking measurements from the TV, you can transfer the markup to the plasterboard wall. Add 10 cm on each side. They will be required for quick and comfortable installation and easy maintenance.
Free space is needed to ventilate the back of the TV, which should not overheat. You will have to use the building level in the process of work. This will ensure that the lines are horizontal.
After reviewing the photo of drywall niches for TV, you can understand which design is suitable for your apartment or house. After marking, you can proceed with the installation of guide profiles. Self-tapping screws will act as fasteners.
Additionally, you should prepare an electric drill and a screwdriver. You can make structural elements from profiles. Before starting work, it is better to draw a niche diagram. You need to decide on herdepth. It is important not to overdo it, because if you make the space too deep, the design can look unwieldy.
Subtleties of mounting the frame
Before you make a drywall niche for a TV, you should familiarize yourself with the nuances of mounting the frame. So you can understand that the wall, before starting installation work, must be checked for the presence of depressions and bumps, which, if necessary, are leveled or knocked down. The ideal approach would be to level the wall.
If it is based on a false wall, then it is necessary to install a starting profile on the ceiling, walls and floor, which is fastened with impact dowels. Their dimensions are 6 x 40 mm. Between adjacent fasteners, the pitch should be 40 cm.
At the next stage, it is necessary to install vertical guides, the distance between them should be 60 cm. At the same stage, several profiles must be connected together to make the corners stronger.
Before you make a drywall TV niche, photos, ideas need to be considered. They will let you know how to proceed. For example, after installing vertical profiles, you can proceed with the installation of horizontal planes. It is better to strengthen the elements of this part of the structure with self-tapping screws with dimensions of 3.9 x 9.5 mm.
When installing the frame, you must lay a polyurethane tape between the profile and the concrete wall slab. In the process of carrying out the work, you will face the need to cut a profile that is cut with scissors for metal orgrinder.
Installing drywall sheets
With a drywall TV niche, the interior of the room will look unique. To implement the idea in the next step, you can start cutting sheets of drywall in size. At the same time, it is important to observe the parameters so that neighboring elements form a straight line. Protrusions are not allowed.
The cut fragments are then attached to the profiles. To create a three-dimensional effect and increase the strength of structures, additional profiles should be placed along the edges of the niche. The dimensions of these elements must correspond to the parameters of the guide profiles.
If you decide to make a drywall niche for the TV with your own hands, then before finishing work in the frame area you must conduct communication networks, this should include the cable for the TV, backlight wires and sockets. The latter should be in accessible places, because you will need to connect several devices at once. After laying cables and wires, you can proceed to sheathing the frame, which should be covered in front. Then you should do the sidewalls.
Sheathing recommendations
You can choose one of the drywall TV niche ideas presented in the article. And already at the stage of sheathing the structure, you will have to act according to the principle that all masters adhere to. Drywall is fixed on the frame with self-tapping screws with the following dimensions: 3.5 x 25or 3.5x35mm. Hats should be recessed inside the sheet by 2 mm.
The outer side panels are installed first. In this case, we are talking about a niche that protrudes above the surface. The next step will be the lining of the internal verticals. Lastly, you can proceed to facing the pediment. Plasterboard sheets in this part overlap the side ones. Docking must be carried out flush with the wall sheets.
Finishing
At the final stage, you will need to trim the drywall niche for the TV. Photos of the interiors will allow you to understand which method of cladding is better to give preference. To carry out the work, you should prepare:
- putty;
- primer;
- sandpaper;
- paint composition.
Putty is applied to the joints, after which a sickle tape is glued to the surface. The bases are covered with a primer, then you can proceed to leveling the sheets with putty. After drying, this layer is processed with sandpaper, and then the primer is applied again. This will reduce the consumption of paints and varnishes. One of them is applied in the next step. Holes are drilled in advance in drywall sheets to connect the backlight.
Which backlight to choose
Today, there are two lighting options for niches:
- spotlights;
- LED strip.
The former require complex electrical manipulations. You will need to create additional wiring, whichentail financial costs. This will delay the process and complicate the work. Spotlights are best installed during repairs, then you will have the opportunity to lay the wiring.
If you are engaged in the construction of a separate structure, then you should not violate the finished space. In most cases, home craftsmen prefer LED backlighting. You don't need any special knowledge to install it. LEDs are mounted after mounting the niche, at the time of its design.
In closing
A niche can become a unique part of the interior. It will decorate the living room or bedroom. It can also be added to the dining room, if you are used to watching TV there. Drywall is an excellent material for this design. It is easy to process, it helps to create different shapes, and its finishing is a breeze. You can choose one of the many solutions at this stage.
