Today, with constantly updated materials, you can create truly amazing things in the design of apartments. The arched ones have gained great popularity
openings that fill the apartment with a special splendor. Many are interested in this topic, how to make a drywall arch with your own hands? After all, in fact, drywall is the most profitable and flexible material for this role, it is easy to process and not very expensive.
Alternatively, you can make an arch with plaster using a template, but this is not very practical. It is much easier to make a drywall arch without using templates, but simply by following some guidelines.
Preparation of the opening and the technological process of creating the arch
Everything starts with preparatory work. As a rule, the arch in most cases is installed instead of the door block. The working area and the opening are thoroughly cleaned of dust and other debris. For those who still do not know how to make an arch: fromdo-it-yourself drywall parts are made that will be attached to the sides of the opening. You need to do the following:
- Mark up on sheets of drywall that match the width of the sides of the opening. To make a circle for an arch or, in other words, an arc, you need to prepare a pencil, an awl and a cord.
- Then, focusing on the radius of the future arch, make two loops at the right distance. An awl and a pencil are threaded into the loops, then the awl is stuck into a drywall sheet, and an arc is drawn with a pencil, while the lace should be taut.
- The second part of the arc is drawn according to the template of the first part. Next is the frame for the arch.
Gradually, the topic of interest to us, how to make a drywall arch with your own hands, is already becoming
more understandable, and you have an idea where to start, however, you still need to make a drywall frame.
Execution of the arch frame
The frame plays almost the main role here, since it is actually the base on which the drywall elements are attached. The frame is made of a profile on a metal base. In order for the sheet to bend, its side parts are cut. For a more precise fit, you can use the prepared sidewalls for the arch as a template.
After the frame is made, you can strengthen it in the doorway, and then screw the finished sidewalls to the frame. We nullify the topic of interest to us, how to make a drywall arch with our own hands, and finish the lower partcurved surface.
There are several options with which you can bend drywall without breaking the sheets. So:
- In the first case, they use the dry method, when the bend does not exceed the radius
- The second way is to soak the sheet, when moistened, the sheet can bend, and after drying, leave the shape into which it was artificially deformed. With this option, you can make an arch for the opening without problems.
curvature of 30 cm. To do this, small cuts are made along the sheet, which should not damage the bottom layer of paper. It is necessary to go deep a few millimeters into the sheet. Then the sheet is slowly broken, then attached to the frame with screws. All previous cuts are puttied.
Probably, now we have finally dispelled doubts about how to make a drywall arch ourselves. You just need to be guided by small but effective rules, and you will get the expected result.
