When finishing any room, you need to choose what materials will be used for the walls of the room. There are many options for this, among which special panels are considered to be in demand. They can be formed from different materials, and also have a variety of sizes. It is important to understand what panels are, what are their parameters, and also in what ways they can be attached to the base. Answers to these questions in the article.
Pros of using wall panels
Wall panels are chosen quite often for different rooms. This is due to the numerous advantages of this finishing method:
- due to the dense structure and the ability to use the frame, there is no need to perform complex preliminary preparatory work and level the base;
- usually they have a multilayer structure, so their use can increase the sound insulation and thermal insulation parameters of any room;
- behind the coating in the cells of the frame, you can lay communication elements, which will provide an attractive view of the room, in which there will be no unnecessary details;
- panels can be created from different raw materials, so for specific operating conditions you can choose the best option;
- the cost of products is considered low and affordable for every customer;
- Installation is a quick and easy job and can be done with frame construction or good quality adhesive.
Having understood what wall panels are, it will not be difficult to use them to decorate any room or building facade.
Types of panels by application
These materials can be used:
- For building facade. In this case, sandwich panels are usually used, which not only have high attractiveness and resistance to atmospheric factors, but also provide insulation for the walls of the building.
- For interior decoration. They are usually used on the balcony or in the bathroom. They have good resistance to high humidity, and are also available in numerous colors and textures.
A photo of the panel for the wall is presented below, and there are really many design options that allow you to decorate the room in the optimal style. Additionally, you can choose a specific color that matches the color scheme of the room.
Types of elements by different parameters
It is important to decide not only what panels are, but also in what varieties they are presented on the market. They are classified according to differentfeatured:
| Product classification | Varieties |
| By design | Rack-mounted, typesetting or single sheets, with typesetting being the most sought after as they are easy to use and have a square shape. |
| By size | Panel sizes can vary from 30x30 cm to 98x98 cm, so elements that are ideally suited to a particular room are selected. If rack products are used, then they are rectangular boards, the length of which varies from 240 to 370 cm, and the width ranges from 12.5 to 30 cm. |
| According to surface structure | Smooth or embossed. |
| By raw materials | Plastic, wood, drywall, or made from MDF, chipboard, or fiberboard. |
| According to surface design | Matte, glossy or glazed. |
When choosing products, you need to pay attention to all the above characteristics, which will make it possible to get a really high-quality finish.
Views by material of manufacture
Most often, wall panels are selected based on the material they are made of. Products are considered in demand:
- wooden elements are high cost, environmentally friendly, wear resistant, practical and attractive, butdo not use them for the facade of the building or in a room with a high humidity index;
- Fibreboard panels are rigid and elastic, so they can easily cope with various mechanical stresses, and also have an acceptable cost;
- PVC products are considered to be the most sought after, as they cope well with high humidity, are durable, attractive and affordable, but they are easy to scratch.
Plastic panels are most often chosen, they will last more than 20 years, they can easily cope with low or high temperatures. Are flame retardant and durable.
Mounting Methods
It is important to understand what panels are and how they can be installed.
The first method involves using a wireframe. It can be made of metal profiles or wooden slats. For a room with a high humidity index, it is desirable to use metal products. Insulation or elements of communication networks can be placed in the frame cells.
Panel mounting can be done in two different ways. The second method is to use a quality adhesive solution. When applying it, it is desirable to pre-level the base, since significant transitions or irregularities are not allowed. This method is suitable for small spaces, so even the smallest space that the frame can take is important.
Conclusion
Thus, the photo panels look really bright andattractive. They are available in numerous types, so they differ in size, material of manufacture, colors and other characteristics. Their installation can be done in two different ways, and any method is easily implemented on your own.
This finish results in a beautiful, durable and reliable wall covering.
