Today, it is less and less common to find houses where food is cooked on old stoves. Increasingly, you can find gasified facilities. However, their operation has its own characteristics. For example, it is preferable to install gas meters in an apartment, because they help save money on utility bills.
Do I need to install the device?
The principle of operation of such devices is quite simple. The gas that passes through the chambers under pressure catches the twisting mechanism with numbers. There are several such cavities inside the counter. They are separated by plastic or aluminum plates.
As for the question of the feasibility of such a device, it is advisable to install gas meters in an apartment. The fact is that they have significant advantages. You will consider them further.
Pros of the device
So, the device has the following advantages:
- Easy design and fast installation. However, you can make it yourself or with the help of a licensed specialist.
- Reasonable cost and a large selection of models. It all depends on the size of your apartment, as well as your needs.
- You will know exactly how much gas you are burning. This will make it possible to redistribute consumption.
- If household gas meters are installed in the apartments, then you will pay at lower rates. Otherwise, the cost of blue fuel will be higher. In this case, you will pay for it, even if you do not use it. If you do not use gas for some period with the meter installed, then you will not have to pay for it.
Household gas meters are very important devices that require careful handling and proper operation. Naturally, you should not try to repair them yourself or break the seal.
Device flaws
Now we should consider what problems may arise during the installation process, and what disadvantages the meter has:
- Periodically, the device will need to be checked out. Therefore, be sure to monitor the integrity of the seal. Do not try to use different bugs to save money. Specialists can detect this, and you will receive a serious fine.
- There are certain rules for installing a gas meter. That is, it cannot be mounted wherever you want.
- You will also need a permit from the gas service. Therefore, even self-installation of the device is fraught with difficulties.
- Of course, installing a meter is not free.
If you are not afraid of these shortcomings and the device is appropriate for you, then you should consider its varieties and features of choice. This question is quite important, as it allows you to install exactly the device that will be most effective for you.
Varieties of models
You will learn the rules for installing a gas meter later. Now you should figure out what types of devices exist. So, you can find aggregates like this:
- Membrane. Their advantage is the simplicity of the device and use, low cost, accuracy of counting the used fuel. However, they should not be subjected to any, even the slightest overload.
- Rotational. They are small, but can pass a fair amount of gas. In addition, these devices can tolerate overloads. But they are quite expensive, as they are made of special alloys.
- Turbine. Such devices are quite effective and can be equipped with special add-ons that can transfer indicators to the service automatically.
- Vortex. They have a large measurement range, low sensitivity to gas purity. They also work from the mains.
You can install a gas meter very quickly. However, you must first choose the right one. In everyday life, the first type of devices is most often used.
How to choose the right machine?
So, installing gas metersstarts with buying them. There are some selection rules that will help you get exactly what suits you best:
- First of all, figure out the type of device and its bandwidth. Do not buy a unit that is too powerful if you have a small apartment or central heating.
- Please note that the counters are left or right.
- When buying a device, be sure to get a guarantee.
- When choosing, pay attention to whether the release date is indicated on the counter. This is necessary for verification.
- Before installing a gas meter, consult an expert.
In principle, these are all the rules for choosing the presented technique.
What tools and materials are needed for installation?
Installation of gas meters can be done by hand. To do this, collect all the necessary tools. You will need:
- Counter.
- Wrenches in different sizes.
- Adapters with which the meter will be connected to the incoming and outgoing pipe.
- Fasteners.
Also, you will need to purchase insulating material, which will eliminate the possibility of gas passing through the connections.
The rules for installing a gas meter provide for the installation of the device only by a person who has the necessary knowledge, experience and license to work with such equipment. So it's better to do it right.
Installation projectcounter
Before you figure out the rules for installing a gas meter, consider the very first stage of installation: making a graphic plan. That is, before the device is attached to its place, the representative of the gas service is obliged to draw up a project. Without it, the device cannot be registered.
Installation design not only ensures proper installation, but also makes it legal. Any device that is connected to natural gas must be registered with the government.
Installation steps
The rules for installing meters provide for certain steps that must be followed in sequence:
- First, you should apply to the Gorgaz service. The specialist can be sent from here. In addition, you have the right to use the services of a private company that has a license to carry out such work. Please note that along with the application you will need to submit a copy of the technical passport of the apartment, as well as your personal documents.
- Inspection of your living space by a service specialist. He will be able to clarify the cost of the work and make an installation project.
- Now you can start installing the machine. That is, the gas workers will do it themselves. However, keep in mind that it is better to buy all the components yourself. This will make the job cheaper.
- After installation, you will be issued an executive act, as well as a receipt confirming that the services have been paid.
- The next step will be the installation of a seal on the counter, as well as its registration ingas service. Only after that you will be able to pay for gas according to the installed device.
If you have problems with the operation of the device or it has been accidentally damaged, then you must definitely contact the specialists. This will help you avoid getting fined by regulatory authorities. In addition, you will avoid the great danger posed by a gas leak.
Which rules should I follow?
Now let's look at some of the recommendations that must be followed:
- The height at which the installation will be carried out must be at least 1.6 m.
- A distance of 3-5 cm should be maintained between the wall and the apparatus.
- There must be a distance of 80 cm or more from the nearest gas appliance to the meter.
- The room in which the device will be installed must be well ventilated. That is, it must necessarily have natural ventilation.
- It is undesirable to mount the unit in niches or enclosed spaces.
- If you install the meter outside, try to protect it with a special locker or canopy.
- Install the unit in a location where it will not be exposed to moisture or heat.
- You can not mount the meter on a support that stands separately from the building.
- The horizontal distance from window and door openings should be about half a meter.
These gas meter installation rules are mandatory. Failure to comply may result in a fine oroccurrence of danger. In any case, you have learned how to install the counter. Now you just need to contact the specialists - and you will have the presented device installed. Good luck!
