Due to the fact that vinyl siding is a material with excellent quality characteristics, it is often chosen for finishing the gable of a private house. You can be sure after completion of the work that the walls will be reliably protected from moisture.
Benefits of siding
Siding copes with precipitation perfectly, and also does not fade in the sun. Vinyl finishing material today is considered the most optimal option for cladding. If you will be covering the gable with siding, then you can not be afraid that you will have to do extensive preparatory work. For such manipulations, you can use the plinth finish, which is characterized by impressive strength. But the most commonly used is vinyl siding.
In the building materials store you can choose from a huge range of finishing materials that have many colors and textures. This allows you to get a building designed in the original style. Moreover, you can create a pediment that cannot be found on any other house. This is most attractive to the private consumer, who carefully composes the exterior and independently works on its solutions.
Why choose gable siding
Sheathing of the pediment with siding is most often done for the reason that the alternation of the colors of the material looks very impressive and original. Vinyl sheathing is quite easy to install, its installation can be carried out without resorting to the help of professional builders. This allows not only to save money, but also to carry out the work in the shortest possible time. This material has a not so impressive cost, and a variety of textures and colors can amaze any consumer. After sheathing, you can not worry that the walls of the house will be exposed to adverse external factors. The resistance of the material to high humidity and temperature changes guarantees a comfortable and warm microclimate in the house.
Among other things, sheathing the gable with siding can be accompanied by the installation of insulating material, which significantly reduces heat transfer from the base of the roof. This is especially important for private houses for the reason that about 30 percent of heat loss occurs through the roof. The siding differs in durability and durability, in due course it does not lose color under the influence of an ultraviolet. That is why such material is an economical and durable option.finishing.
Sheathing the gable with siding can be done by installing the material on the wall surface. It can be brick, wood, reinforced concrete blocks, as well as stone. It is important to note that infrequently, house cladding allows the use of thermal insulation materials, which cannot be said about siding, which suggests the possibility of using insulation that is suitable for the consumer in terms of cost and efficiency.
Preparation of tools
Work is impossible if the master does not prepare certain materials and tools. It is important to make sure that you have a mounting knife, a plumb line, a building level, a drill, a tape measure, a steel ruler, a hacksaw for metal, mounting foam, galvanized nails, and self-tapping screws.
Most often, in the absence of any tools, home craftsmen use rented fixtures. This is the most appropriate approach for those who plan to deal exclusively with finishing their own facade. Some hardware stores provide the opportunity to rent the necessary tools.
Finishing the gable with basement siding
Quite often, the pediment is finished using textured basement siding. Thus, it is possible to obtain a design that is distinguished by attractiveness and respectability. The master does not have to invest heavily in the purchase of materials.
Ground siding enoughoften chosen for the reason that it is able to perfectly imitate the texture and color of natural materials such as wood, stone or brickwork. It is able to reliably protect the pediment from external influences. Using this material, you can lay out an interesting and complex drawing by combining textures and colors.
Gable preparation
Sheathing the gable with siding with your own hands involves the need for preparatory work. They consist in cleaning the surface of old paint, all kinds of dirt and dust. If you have to work with a wooden gable, then it must be treated with a deep penetration primer that can protect against mold and rot. In addition, you need to analyze how smooth and dry the surface is. Level differences for installing siding should not be more than 10 millimeters. Otherwise, the veneer may ripple, changing all original linear dimensions.
Installing the frame system
Sheathing the gable with siding with your own hands provides for the need to install a frame system. If you have to work with an old building that has an uneven surface, then installation should be carried out exclusively on the frame. This will guarantee the durability of the facing material, and will also help level the base of the gable and insulate the attic. If the installation is carried out on a new building, then it is not necessary to mount the frame for this. If you intend to place an attic under the roof, then simplyit is necessary to carry out the installation of thermal insulation material, as well as carry out waterproofing work.
The distance between the elements of the crate during installation must correspond to the dimensions of the panels. When the pediment of the house is sheathed with siding, the photo of which you can see in the article, as a rule, the distance between the components of the crate is approximately 30-40 cm. Among other things, all elements must be installed strictly vertically. The correct position of the frame system can be checked using the building level.
Recommendations for frame installation
Gable siding at home can be done using a galvanized steel profile, which forms the basis of the frame. Its installation is carried out on special mounting suspensions. It is preferable to use galvanized steel profiles for installing the crate. This material is lightweight and does not exert additional load on the foundation and walls of the house. In favor of galvanized metal, one can also say that it is not exposed to moisture, does not rot, and also does not rust. It is worth considering that a metal profile will cost more, but the high price will be offset by the strength and reliability of the structure.
Installation of panels on the gable
If you will be covering the gable with siding, step-by-step instructions will help in carrying out the work. For installation, it will be necessary to prepare fittings, namely external and internal cornerprofiles, starting profile, as well as profiles of type J. In addition, you will need soffit panels. If arched windows are located on the pediment, profile J will be simply indispensable.
Initially, you should install fittings for mounting panels. This must be done in a certain sequence. Initially, vertical inner and outer profiles are installed, which are called angular. The fixation of these elements starts from the upper mounting hole, it is necessary to move from top to bottom. Profiles must be mounted strictly vertically, and you should not focus on the roof rafters.
Sheathing the gable with siding, the photo of which is presented in the article, suggests the need to use a plumb line, as well as a water building level. These tools will allow you to analyze the correctness of the installation. Starting profiles are to be mounted along the perimeter. When working with elements that should be located around the window, you should use near-window and finishing strips.
Master's Tips
Profiles should be spaced in 25cm increments while the corners should be mated at the bottom element, leaving a 6cm gap between the back cheeks and the overlap is important. After the fittings have been mounted, you can proceed with the installation of the cladding panels. The technology of work suggests that it is necessary to start installing these elements from the bottom row. During installation, a gap should be left, the maximum width of which is 10 millimeters. This distancewill be necessary when the material undergoes thermal expansion and contraction.
Features of working with spotlights
When the roof gable siding is being sheathed, thermal insulation materials can be installed. In this case, you must provide for a ventilation space, which should be left between the casing and the wall. The diameter of the ventilation hole should be 1/150 of the area of the attic space.
When installing spotlights, it is necessary to mount solid and perforated strips. The latter are necessary to ensure ventilation. Soffits must be installed before the installation of siding on the walls is completed. In this case, it will be sufficient to simply leave a gap for thermal expansion between the final panel and the rail. Sheathing the gable with metal siding suggests the need to use spotlights, which should be installed from the receiving profile. The latter must be placed on the roof overhang.
At the next stage, the level will need to set the elevation to install the receiving profile. If during the installation of this element on the wall there are some problems associated with the unevenness of the base, then this fact can be quite simply corrected by laying large wooden bars, which should be located under the fittings. The technology of mounting soffit strips implies the need to use receiving profiles on the roof overhang and on the wall, while these elements mustbe strictly parallel.
Work on mounting the chamfer
Gable siding may require vinyl bevelling. Due to the fact that the wind boards on the roofs are usually made of wood, they need to be protected from moisture. When installing chamfers, it is necessary to provide a gap for the thermal expansion of the material, its thickness should be equal to 2.5 cm.
The main features of the installation of siding on the gable
Gable eaves siding is made according to a certain technology, which does not allow tight tightening of fasteners. Between the material and the head of the screws, the master must leave a temperature gap. Between fittings and panels, it is also necessary to provide a distance, the width of which can vary from 5 to 10 cm. This parameter will vary depending on the compression and expansion of the material during temperature changes. If you decide to start facing the gable in cold weather, then the panels must first be kept in a warm room, leaving the material there for 12 hours or more. This is to give the finish the flexibility it needs to install.
Conclusion
Installation of siding on the gable of the house is possible if you follow all the rules for installation. It is important to purchase the entire set of materials and tools. Only then will the master be able to complete the work without interrupting the process in the shortest possible time and get the expected result. And sheathing the pediment of a wooden house with siding will be quite easytask. Stock up on tools, knowledge and patience - then you will get a truly comfortable home.
