Faux leather products are very sensitive to various kinds of influences and are considered impractical. However, their cost attracts, and often this factor is decisive when choosing furniture or other items. Given this, the question of how to wipe a pen from leatherette is of great interest to modern users, since stains of this nature are most often found in everyday life.
Handles and surfaces
Currently, there are just a huge number of different types of ballpoint pens, which differ in the composition of the paste. At the same time, even one manufacturer may have products that differ in chemical characteristics from each other. The same variety is typical for leatherette. Products made from this material can have completely different types of surfaces, which can differ both in reaction with water and in roughness. That is why, when thinking about how to wipe a handle from leatherette, it should be borne in mind that it is impossible to find the same solution for different products.
Chemical Methods
These methods involve the use of special substances that react either with the surface itself or with the composition of the paste frompens. With the right selection of such a composition, it is possible to minimize the likelihood of damage to the product by friction. However, you need to be very careful, because there is a risk that you can discolor the place of the stain or change the very structure of the material.
Soap and water
This technique is quite simple and will not damage the surface. Before wiping the handle from leatherette, you need to apply soap or detergent to the contaminated surface. Then all this is left for a few minutes, after which the solution is washed off with plenty of water.
This technique is not always effective, but it is recommended to try it first. This is due to the fact that it is considered the safest.
Nail polish remover
When thinking about how to wipe a ballpoint pen from leatherette, you should remember that some products can harm the surface. Therefore, for this method, it is necessary to take a liquid that does not contain acetone. It is sold in stores with household chemicals.
Apply the product with a small swab or cotton swab wound around a match. This produces a little friction to increase the effect.
Hairspray
This technique is considered one of the most effective and safe. However, it is worth remembering that before you wipe the paste from the handle from the leatherette using varnish, you need to choose it correctly. Experts recommend the simplest formulations that do notcontain additional inclusions or third-party effects.
- First, the varnish is applied to the surface.
- After that, you need to wait 2-3 minutes.
- Then apply another portion of varnish.
- After that, immediately wash the stain with a napkin.
Special stain removers
When asking the question of how to wipe the handle from the leatherette sofa, many people forget that there are a number of special chemistry that was created specifically for these purposes. Such a tool can be purchased at almost any hardware store, and its price is relatively low. Such substances must be used in accordance with the instructions for use.
Napkins for students
Recently on sale you can find special napkins that are made for students. This is exactly what you can wipe the handle with leatherette without much difficulty. The fact is that such products are produced specifically to remove stains of this nature from clothes. Therefore, they are ideal for leatherette. Use them according to the instructions.
Soda and ammonia
Quite often, when asked how to wipe a handle from a leatherette bag, people suggest using soda and ammonia. This composition has proven itself in working with clothes and copes well with a variety of stains.
- First, dilute a teaspoon of soda in one glass of ammonia. In this case, the mixture should be homogeneous.
- Next, apply with a swab or cotton wool a small amountliquid on a contaminated surface.
- May need to rub a little to enhance the effect.
- After that, the place is washed with a small amount of water.
Vegetable oil
Quite often you can wipe a ballpoint pen from white leatherette with vegetable oil. This substance has proven itself when working with genuine leather and there is a possibility that it will cope with such a surface. However, it is very important to remember that some materials are not protected from the effects of fats and are destroyed upon contact with them. Oil can also cause stains that are much harder to remove than paste or ink.
Car Interior Care Products
The automotive industry is sometimes developing much faster than the household chemicals industry. That is why most often high-quality means for removing stains from leatherette can be found in specialized stores where motorists buy goods. The fact is that car interiors are most often sheathed with this material and special substances are created to care for it. However, it must be remembered that their cost is quite high, which means that such compositions are suitable for expensive products.
Mechanical Methods
Before you wipe the pen from white leatherette using chemicals, it is worth exploring some mechanical methods. They are sometimes quite simple, and on some surfaces their choice is considered the most optimal solution.
Melamine sponge
When considering whether it is possible to wipe a leatherette ballpoint pen, some users have come to the conclusion that a melamine sponge is best for this procedure. This material has the form of a rubber eraser, which consists of crystals that are insoluble in water. Upon contact with the surface, it begins to foam and absorb dirt.
For high-quality removal, you need to moisten the sponge and lightly wipe the place of contamination with it. Some users claim that the traces of the paste will go away almost instantly. However, it must be remembered that melamine is hazardous to he alth and work should be done with gloves. Also, they should not treat surfaces that have contact with food.
After working, wash the product with soap and water. Then it is dried with a hair dryer.
Abrasives or scrapers
With mechanical action on the surface, it is very easy to remove almost any contamination from it. In this case, it should be borne in mind that a small layer of the material itself is also erased, which is very harmful for thin coatings. Therefore, use a special eraser, brush or scraper only on rough surfaces or on homogeneous leatherette.
Adhesives or special rubber
Some housewives recommend removing these stains using special raw rubber or adhesives. These include pencil erasers and even chewing gum. This method only works if the surface hassufficient strength and can withstand prolonged mechanical stress in the form of friction. Otherwise, the color of the coating will change, hairiness will appear, or a hole will form. This technique should not be used on expensive or thin things.
Recommendations from experts
- Use chemicals only in a ventilated area and away from sources of fire or hot objects. Most of these compounds emit substances harmful to the human body and are highly flammable.
- Before you start using the chosen technique, it is worth trying it on a sample. To do this, select a section of the product that will not be visible. It is used for testing.
- Sometimes it's much easier to dry clean a product, where for a small fee they can remove almost any stain. Do not experiment on expensive items, as the probability of damaging them is very high.
- Before you start choosing the best tool, you should evaluate the quality of the surface. There are many varieties of this material, which are often made on a fabric basis.
- Work with some substances should be done with gloves. The fact is that most of them destroy the skin with prolonged contact. Therefore, after treatment, it is recommended to thoroughly wash the area with soap and water. If they get on the skin, then it should be thoroughly washed and smeared with cream.
Conclusion
After looking at various ways to show how to wipe a pen withleatherette, we can conclude that such stains are one of the most popular, since even special means are created to remove them. Using even the simplest technique, you must be very careful not to damage the surface. Sometimes it's worth waiting a bit and buying a quality solvent than after an unsuccessful attempt to purchase a new thing.
