The solution to the issue of thermal insulation of buildings has become especially relevant after the increase in the cost of heating. Indeed, the main task is to reduce the consumption of accumulated energy for heating the street. As a result, the demand for heaters, which are used in the manufacture of bas alt fiber, has significantly increased.
Production
Unlike many modern polymeric materials, only natural raw materials are used in the manufacture of the insulation in question. The basis of the production technology was the property of bas alt rocks of igneous origin to swell and go into a viscous state.
When the rock is exposed to a temperature of about 1700 ° C, the above processes occur. As a result, with the help of special equipment, a thin bas alt fiber is obtained, from which a layer of insulation will subsequently be formed. To create a homogeneous layer, chemical additives and natural binders are added to the composition. Additional elements do not impair the characteristics that it hasbas alt fibre. The insulation after final processing acquires unique properties, which became the reason for its use for thermal insulation of buildings.
Features
As a result of production, bas alt fiber becomes an effective heat-insulating material. The advantages of its use are based on the unique technical characteristics. Thanks to them, the scope of the material is currently quite wide - from the insulation of building facades to shipbuilding.
The main parameters that bas alt fiber insulation has are as follows:
- Fire safety. The material does not burn and does not support this process.
- Low thermal conductivity. This is made possible by numerous closed pores.
- Safety for people. The material does not emit toxic fumes when exposed to high temperature or humidity.
- Does not support mold or mildew growth. This is important to take into account when installing the insulation hidden.
- Resistant to many chemicals.
Together, the above properties allow the use of bas alt insulation in many technical and construction areas.
Application
Initially, bas alt fiber was developed as an effective thermal insulator in industrial production. But later the scope of its application has expanded significantly. Currently, bas alt insulation has become an indispensable component for thermal insulation of facades.buildings, both internal and external walls.
In addition, it has been used to produce new efficient stainless steel chimneys. In their design, the bas alt heat insulator prevents the formation of moisture inside the pipe.
To preserve the integrity of steel structures, especially dense models of insulation are used. They not only maintain the desired temperature level, but also improve the process of removing excess moisture.
Installation
How to install bas alt fiber correctly? To do this, it is necessary to analyze the area of insulation, and in particular - the material for making the walls. If there is a possibility of moisture penetration, then a waterproofing procedure is performed before installing the bas alt fiber.
Then you can start the work itself. To insulate the facades of buildings, slabs of bas alt insulation are used, which can be fixed with the help of special dowels - "umbrellas". Upon completion of installation, the surface is covered with a waterproofing layer and decorative material.
It is worth noting that the cost of bas alt insulation relative to other types of thermal insulation is high. But the unique qualities and absolute safety for human he alth become the determining factors when choosing.
