When buying a walk-behind tractor, special attention is paid to the technical characteristics of the equipment, while few people pay attention to the wheels and the quality of their workmanship. Motoblocks are lightweight, with the exception of professional options. Increased work efficiency and reduced labor costs are achieved through good ground and wheel traction.
Views
Wheels are presented in various designs and are designed to perform many functions. There are several varieties, the most common are the following:
- metal grouser;
- solid rubber;
- traction;
- pneumatic.
Traction wheels for walk-behind tractors are characterized by a characteristic pattern on tires and versatility in use. They provide a variety of functions through an extended grip. The materials used in the manufacture have a long service life and resistance to mechanical damage. They can be usedboth off-road and as snowplow wheels.
Pneumatic wheels for walk-behind tractors provide equipment stability on difficult surfaces and are often installed on domestic equipment. They are indispensable when digging the soil. When choosing, you should give preference to products with a diameter of at least 40 cm and a pronounced pattern on the tread.
Heavy Ground Wheels
Stony soil is the most difficult to handle, in this case it is recommended to use solid wheels. They have a long service life, the only drawback is a lot of weight. Products are indispensable for MTZ motoblocks, mini-tractors and diesel devices.
Some walk-behind tractor wheels are equipped with special lugs that provide additional power due to the weight of the structure. Equipment equipped with them will not get stuck even in heavy clay soil, as steel teeth will push the transport forward, preventing penetration into the ground. The front support wheel requires special attention. It is on him that the performance and efficiency of equipment depends, and he also accounts for most of the load.
How to choose wheels for a walk-behind tractor
The main selection criterion is the operating conditions of the equipment. It is worth paying attention to the number of rubber layers and the quality of the material, as this has a direct impact on further operation and service life. Medium to small size wheels are suitable formodels with air cooling, diesel engines, as well as for belt-type walk-behind tractors. Powerful devices with a large mass require the installation of wheels with a large diameter.
Wheels for motoblock trailer are classified according to similar criteria. Heavy duty options are recommended as they are subjected to high pressure when transporting heavy loads.
Benefits
Despite the fact that it is impossible to manufacture wheels from scratch, it is enough to supplement the selected base yourself and thereby obtain the necessary characteristics at minimal cost. The best option for modernization would be wheels from a car or motorcycle. The easiest way to manufacture a structure with lugs. The wheelbase can be expanded with the help of special extensions, this will increase the functionality of the equipment and ensure a higher quality of work. An additional advantage is given by do-it-yourself twin metal wheels for a walk-behind tractor, in which free space is formed for weighting agents. These products are not suitable for use on a trailer, but they offer many benefits:
- maximum surface contact;
- no special tools required for manufacturing;
- if necessary, you can quickly remove the outer wheels;
- high performance with minimal slippage.
How to dowheels for walk-behind tractor
Double designs have become widespread not only due to their advantages, but also due to the possibility of rapid production. First you need to choose a suitable base and cut small treads on the tires. Squares with a side of at least 25 cm are inserted into the bypass, made of a steel strip measuring 5x0.5 cm.
Metal teeth are welded in increments of at least 20 cm, since with a denser placement they will not sink into the ground to the required depth.
After welding the squares, a second bypass is formed, resulting in a structure resembling a vase. The final step is to put the tires on the finished rims.
As it becomes clear, it’s not at all difficult to make wheels for a walk-behind tractor with your own hands, and you don’t need special skills and tools, the main thing is to choose the right components.
