If you do not know how to make a warm floor with your own hands, in this article you can find some useful tips. So, first, let's look at how it happens. The design can be water or electric. The first option works at the expense of a centralized heating system, and the second - from the network. In order to make a water structure, it is necessary to select pipes of small diameter made of metal-plastic, which can withstand a sufficiently high temperature. In the second case, you will need a high quality heating cable.
Now let's look at how to make a warm floor with your own hands using technology. First you need to understand the general sequence of work. So, we prepare the base surface for laying pipes or cables. It must be clean, even and dry. That is, it is necessary to make a thin concrete screed.
After it dries, you can carry out the procedure for laying the elements of the warm floor. Modern laying technology recommends the use of special aluminum guide plates with pre-prepared channels into which the pipe will be mounted(cable).
After you have made a warm floor with your own hands, it is advisable to fix the heating elements so that they are tightly pressed to the base. The pipes must be firmly interconnected and connected to a centralized heating pipe. However, before laying the elements on the floor, waterproofing material should be laid. After mounting the structure, you need to fill it with concrete and make a fine finish.
If you figured out how to make a warm floor with your own hands using water pipes, then the technology for laying an electric cable has its own characteristics. So, first you need to choose the appropriate material: single-core or twin-core. The first option is the most acceptable.
How to make electric floor heating without mistakes? First decide on the power of the cable, although it can be regulated using a thermostat. In addition, sensors that determine the heating temperature will be connected to the system. Preparing the base will not take much time. First you need to level the base surface with a rough concrete screed, and then lay a waterproofing film on its surface. The next step is laying the heating element. To fix it, you can use special guide plates with grooves. This takes into account the area of \u200b\u200bthe base and the laying step. In addition, you need to remember some rules for arranging the system. For example, it is impossible for the cable parts to intersect, the minimum distance between the sections should be 7 cm,the bend should not have a small radius. In addition, the heating element must not be placed under furniture or household appliances. If you want to additionally insulate your floor, then you should not mount the cable directly on the used material. He needs to be isolated.
The next installation step involves connecting the structure to the network, connecting the thermostat and sensors. All connections must be well bonded and insulated (like the cable itself). To do this, you can buy clamping terminals. If everything is done correctly and there were no problems with the operation of the system during the check, you can pour the concrete screed and lay the fine finish.
If you do not know how to make a wooden floor warm, then after reading the article, you will have an idea.
