In our progressive time it is difficult to meet a person who would not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. There are various expensive holders available in stores, but in our article you will find out what you can make your own phone stand from.
Stationery binders
Surely those who study or work in the office will find several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 or even more binders. Some craftsmen assemble three-dimensional structures from a variety of clips of various sizes. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.
From the same binders, you can build another design by placing the clips opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, pinch a small piece of cardboard on both sides.
Using pencils
If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic end to prevent slipping on the table and a stronger grip on the phone.
Bottle Models
In the household we use a lot of cleaners and detergents. Most of them are contained in plastic containers. It can be used as a mobile device holder. How to make from a bottlephone stand, see below.
The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All dimensions are relative - measure at your discretion. On the opposite area of the bottle, cut a hole corresponding to the parameters of the charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or cloth.
Paper clips
The simplest and most affordable stand option is an ordinary metal paper clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching videos at all.
Cardboard and plastic cards
How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, drawshape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.
If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. Stand ready.
Unusual coasters from simple things
Savvy people started using ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.
How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.
Another interesting detail that will help keepphone in a vertical position - an old cassette. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.
As you can see, from the simplest items that can be found in every home, you can make such a useful thing as a phone stand.
