Assignment of road curbs. Their advantages and features, description of their functional characteristics
Assignment of road curbs. Their advantages and features, description of their functional characteristics
The border acts as one of the important elements of any path, equipped in the garden, if it is based on paving slabs. With the help of these elements, it is possible to provide an attractive appearance of the exterior and to give rigidity to the structure, which will be protected from the effects of precipitation. If the curbs are installed, then you can be sure that the path will remain as attractive as it was when it was laid
An article about how water wells are arranged. It tells about the disadvantages or advantages of models of wells made using a particular technology. The choice should always be made only based on the set of necessary functions
In order to ennoble the street and the carriageway, as well as to fence off the road from the sidewalk, side stones are used. Simply put, this is the most common curb made from natural rocks
This article will introduce the reader to the main points that you need to pay attention to when working with corrugated board
Construction processes are often influenced by external factors that cause accidents. To control them, special forecasting and complex analysis systems are being developed, which makes it possible to prevent such threats by taking appropriate measures or changing the tactics of working activities. One of the central areas of such control is geotechnical monitoring (GTM)
Cement is the main component of dry mixtures for construction purposes, which are used in the construction of buildings, structures, laying roads, performing reinforced concrete structures or plastering and finishing works. In construction practice, the density of cement (as the ratio of mass to volume) is divided into bulk and true
When laying tiles on a wall or floor, it matters a lot what adhesives are used. For porcelain stoneware - this is one type, for wall tiles made of white or red clay - another. The difference lies in the components. In a dry state, porcelain stoneware adhesives are a sand-cement mixture with water-soluble polymers in certain proportions. Due to these components, the plasticity and viscosity of the mass, as well as the adhesion of the material, is ensured
For foundation construction, heaving soils are a specific problem, which involves taking into account the impact force, mass and expected load. This primarily applies to clay, dusty and fine-grained soil. But with the right approach, difficulties can be avoided
In this article we will tell you in detail about the features of such popular materials as M100 concrete and M100 mortar, how they differ from others and where they can be used
Among the leading developers of St. Petersburg, since 2010, the construction company "CDS" has firmly entered the top ten. And according to the results of the housing being built, it took first place in the list of St. Petersburg developers
Steel fiber is intended to improve the quality characteristics of concrete after it has gained its design strength. This material performs a power role, and also ensures the reliability of the plate. Metal fiber forms a single structure with a solution
Creating a solid foundation is one of the most important steps in building a house. The designs of the carrier base may vary, but the solution of problems of mechanical reinforcement in one form or another implies any technology. The most common operations to support the foundation are the laying and knitting of reinforcement, the rods of which penetrate and strengthen the foundation structure
The process of erecting a house or some kind of building includes a complex set of works that use complex mathematical calculations and analyzes. However, is everything really so complicated with these GOSTs and intricate calculations? Let's try to answer this question in the course of considering the characteristics of the masonry mesh
The world of composite products. Scope of composite materials. Features of processing composites. Subtleties of milling
Finishing the foundation with siding is quite common today. This material is universal, which is why it can be installed on almost any surface
The size of doorways is regulated by the mandatory requirements of GOST and a number of standards set forth in various building documents and rules (SNiPs)
TER: what kind of animal is this and why is it needed? All answers about territorial prices and budgeting in the article
The ability of developers to count their money has already become legendary. I am glad that due to the high cost of houses, our compatriots nevertheless began to pay attention to issues related to heating and thermal insulation of buildings. In particular, houses made of polystyrene foam blocks have become so popular precisely because of their excellent characteristics in terms of heat retention
Wall block is a modern material that allows you to build strong walls in a short period of time. Therefore, today he is a leader in the construction of any structures, including country houses and cottages
Establishing a foundation is not complete without creating a form for laying a supporting structure. Whether it is a tape structure or a monolithic slab, the installation of retaining elements will be required
Black crushed stone is most often used when laying road surfaces. The article describes the methods of manufacturing this material and its features
Crushed limestone is used in finishing works, as well as in the production of mineral fertilizers and lime. This material is produced by crushing and further sieving the rock, which is limestone
Every person at least once in his life did repairs at home or did work related to the repair of his apartment or cottage. Today, an indispensable assistant in repairs is a screwdriver
The correct definition of the number of storeys of structures, space-planning structure is important both in architectural and economic terms. Competent construction and design of residential buildings provides a solution to socially significant problems. Due to this, proper conditions for the life of people are created
The article will discuss what rooftop boilers are, why they are needed, as well as boilers with a gas boiler
This article describes the company "Investstroy". Reviews, photos, a lot of useful information about this company can be found here. The article also contains information about cases with the developer, the opinions of company employees are provided
Insulation of the attic roof allows you to maintain a comfortable temperature in the room during the cold season. In the process of carrying out the work, it is worth considering some of the nuances associated with the design features. The roof and walls of the room are a single whole, or fit tightly to each other. Because of this, the space gets very hot in summer, and cools down in the winter months, while maintaining a suitable temperature is quite difficult
Today a recognized need is the use of vapor barrier materials. Membranes are considered the most popular and widespread, due to their ability to effectively protect structures for various purposes from the harmful effects of moisture and wind
Plastic pipes of large diameters are specially made plastic products with a cross section of 500 to 2400 mm, which have great rigidity. They are mainly used in the laying of pipelines for sewerage or heating systems in industry
Recently, outdoor stoves are becoming more common. They are convenient to use, in addition, you can cook food directly in a circle of friends. If you build such a structure yourself, then you will be able to save money, and in the end you will get a real decoration of the exterior of the site
How to determine the scheme of the thermal node. Analysis of the scheme of the thermal unit in detail. The place of the scheme in design. Features of the equipment of the heat point. Circuit Symbols and How to Read Them
Well cleanup should begin by identifying the cause of the contamination. Irregular operation, errors in construction and drilling, and much more can lead to such troubles. Sometimes aquifers change their direction, and the reason will be natural. If the structure is devoid of protective mechanisms, then more debris will fall into the mouth
For the first time such a finishing material appeared in the Middle Ages. This tile was produced in one of the German cities, which was called Metlach. Hence the name. In our country, this finishing material appeared only in the 19th century
The article is devoted to adhesives for insulation. The optimal solutions for various thermal insulation materials are considered, the features of the compositions and manufacturers are noted
Modern living space should be decorated with quality and modern materials. This does not mean at all that those of them that have been known to man since ancient times should be forgotten or relegated to the background. For example, tiles, which have been used for a very long time, are still relevant today. Especially for bathroom decoration
Porcelain tile is a versatile material for finishing various surfaces. Porcelain stoneware appeared as a result of mistakes made in the production process of traditional ceramic tiles. According to technology, it is fired in a furnace heated to 900 degrees. If the temperature is increased literally by a third, then as a result of such firing, the components that make up the mixture are partially melted and sintered into a homogeneous mass
In recent years, the construction of almost all country houses is associated with such expenses that everyone seeks to somehow compensate for the costs. Unfortunately, it is not always possible to combine cheapness and quality
Installation of metal-plastic windows is a matter that requires accuracy and experience. That is why it is better to trust the experts. Experienced installers will do their job quickly, efficiently, in compliance with the installation technology and safety precautions
Any construction takes a lot of time and effort. Especially if the construction is done by hand. You need to know a lot: understand the principles of building an object, the properties of materials, how to connect structures. We need not only knowledge, but also experience. This article will talk about what cranial bars are, what they serve for and how to properly mount them on a beam